Stress-Strength Parameter Uncertainty Example

New format available! This reference is now available in a new format that offers faster page load, improved display for calculations and images and more targeted search.

As of January 2024, this Reliawiki page will not continue to be updated. Please update all links and bookmarks to the latest references at Weibull examples and Weibull reference examples.

---

This example appears in the Life data analysis reference.

Assume that we are going to use stress-strength analysis to estimate the reliability of a component used in a vehicle. The stress is the usage mileage distribution and the strength is the miles-to-failure distribution of the component. The warranty is 1 year or 15,000 miles, whichever is earlier. The goal is to estimate the reliability of the component within the warranty period (1 year/15,000 miles).

The following table gives the data for the mileage distribution per year (stress):

Stress: Usage Mileage Distribution
10096	12405
10469	12527
10955	12536
11183	12595
11391	12657
11486	13777
11534	13862
11919	13971
12105	14032
12141	14138

The following table gives the data for the miles-to-failure distribution (strength):

Strength: Failure Mileage Distribution
13507	16125
13793	16320
13943	16327
14017	16349
14147	16406
14351	16501
14376	16611
14595	16625
14746	16670
14810	16749
14940	16793
14951	16862
15104	16930
15218	16948
15303	17024
15311	17041
15480	17263
15496	17347
15522	17430
15547	17805
15570	17884
15975	18549
16003	18575
16018	18813
16052	18944

Solution

First, estimate the stress and strength distributions using the given data. Enter the stress and strength data into two separate data sheets and analyze each data sheet using the lognormal distribution and MLE analysis method. The parameters of the stress distribution are estimated to be log-mean = 9.411844 and log-std = 0.098741.

The parameters of the strength distribution are estimated to be log-mean = 9.681503 and log-std = 0.083494.

Next, open the Stress-Strength tool and choose to compare the two data sheets. The following picture shows the pdf curves of the two data sets:

Since the warranty is 1 year/15,000 miles, all the vehicles with mileage larger than 15,000 should not be considered in the calculation. To do this, go to the Setup page of the control panel and select the Override auto-calculated limits check box. Set the value of the upper limit to 15,000 as shown next.

Recalculate the results. The estimated reliability for vehicles less than 15,000 miles per year is 98.84%. The associated confidence bounds are estimated from the variance of the distribution parameters. With larger samples for the stress and strength data, the width of the bounds will be narrower.