BlockSim Examples
Jump to navigation
Jump to search
 |
Quick Start Guide
The BlockSim Quick Start Guide has been designed to help you explore many of the software's key features by working through step-by-step instructions for some practical application examples. The guide is available as a free *.PDF download and you will soon be able to watch videos posted on ReliaSoft.tv.
Analytical Diagrams and Optimization
- Reliability Analysis of a Storage Cluster System - View it in HTML or Video
- Optimized Reliability Allocation - View it in HTML or Video
- Using RBDs for Modeling Failure Modes
- Analytical Diagram Plots
- Allocation Analysis
- Time-Dependent System Reliability for Components in Series
- Time-Dependent System Reliability for Components in Parallel
- Using a Distribution to Approximate the System cdf
- Calculating System Reliability with Duty Cycles
- Load Sharing Configuration Example - Failure Modes Analysis
- Standby Configuration Example - Car Tires
- Reliability Importance Plot Example
Fault Tree Diagrams
- Simple Examples for Fault Tree Gates
- Same Example Modeled with RBDs or Fault Trees (Modeling Failure Modes)
Simulation Diagrams
- RAM Analysis for Remote Telecommunications System
- Effect of Inspection Intervals
- Corrective Maintenance Triggered by Failure of a Subsystem
- Life Cycle Cost Analysis Example
Phase Diagrams
- Aircraft Phases with Forced Landing
- Oil Refinery Phase Diagram Simulation
- Using Success/Failure Paths in Phase Diagrams
- Using Subdiagram Phase Blocks
- Using an Interval Maintenance Threshold in a Maintenance Phase
- Phase Throughput Examples
State Change Triggers (SCTs)
- Using State Change Triggers for Standby Rotation
- Using State Change Triggers to Analyze Tire Maintenance
- Using State Change Triggers to Model Standby with Delay
- Using State Change Triggers to Model Two Standby Devices
- SCT: The State Upon Repair Option
- Demonstrating the "Default OFF unless SCT overridden" option
- Demonstrating the "Default ON unless SCT overridden" option