SynthesisX
Jump to navigation
Jump to search
Version 10 of the Synthesis Platform, Synthesis X, is currently in development with a planned release in Q4 of 2014. This page provides is a working draft of the changes/modifications planned for this Version.
Platform Wide Modifications
Synthesis Wide DFR Planner
- DFR Planner is now included in all Synthesis Applications and defined at the Project Level.
- DFR Planner removed from XFMEA/RCM
Synthesis Enterprise Portal
NewSynthesis Level Resources Added
Application Specific Modifications
Weibull++/ALTA 10
BlockSim 10
- Model window interface updated to use a Tree structure similar to other resources
- UDFs for Folios also changed to be a Tree structure
- FMRA View allows a FRED Report and Allocation Analysis to be associated
- The associated Allocation Analysis has a “Transfer Target Reliability” results back to the associated FMRA item in RCM/XFMEA
- Diagram Skins are now universal (any diagram type can use any skin type)
- I created a new set of default skins for documentation that merged all the old skins together into single files
- Block Order is customizable (via right click menu in diagram)
- Allows you to customize the order the blocks are displayed in Simulation Results
- Simulation
- “On Condition” tasks now have an option to perform the task even if it was already failed before it could be detected. (Currently OC tasks only trigger if the block is about to fail – but will not trigger if it is already failed).
- Subdiagrams allow a Duty Cycle now (similar to Operation Phase Duty Cycle – it is a multiplier on the Block Duty Cycle for all child blocks).
- This was actually added for Version 9.0.10 but it is new so I added it here.
- Interface improvements for Resource Manager
- “Show All,” “Show Only Unused” and “Show Only Duplicates” now properly highlight the option that is selected
- A status bar at the bottom of the window indicates which Resource is selected, the Local/Global view option, and the Selection option
- New Resource: Metric
- Shows calculated results value from a Model or Simulation Result.
- Result values can be manually added to a History log and tracked over time
- Multiple Projects
- More than 1 project can be open at a time
- FMRA View is not available if multiple projects are open
- Blocks can be copy/pasted across diagrams across projects
- If the resources are local, they will be duplicated.
- If the resources are global or in a Template project, they will not be duplicated but retain the reference to that global/template resource
- Any resources created will be created in their Parent resource’s Project
- For example, A URD is in Template1, but is being used in a Local Project. A Model is added to it, that model will belong to Template1, regardless of which Project is using it.
- Optimum Replacement
- Has new options to allow calculating and Optimum Inspection
- Optimum Inspection is only calculated for individual blocks (cannot calculate Common Inspection or Clusters)
- Plot shows Inspection lines if applicable
- FRED Report
- Simulation FRED Report no longer requires the “Report Subdiagram Results” checkbox to be checked on the diagram panel.
- Dashboard
- Dashboard management and interface has been altered
- The Dashboard Designer and Dashboard Manager have been combined into one window
- Dashboards are now Created and Edited via the Dashboard Manager window
- The Dashboard Manager can be accessed via the “Manage Repository” section of the File Menu
- In the Manager Window, Dashboard Layouts can be sorted, and filtered by the current application.