Incident.RepairReplace

XML Element

<RepairReplace PartOrder= >

<OldPart>

<PartID />

<PartName />

<PartNumber />

<PartVersion />

<RetiredDate>

<Year />

<Month />

<Day />

<Hour />

<Minute />

<Second />

<FormattedDate />

</RetiredDate>

<SerialHID />

<SerialNumber />

</OldPart

<NewPart>

<PartID />

<PartName />

<PartNumber />

<PartVersion />

<RetiredDate>

<Year />

<Month />

<Day />

<Hour />

<Minute />

<Second />

<FormattedDate />

</RetiredDate>

<SerialHID />

<SerialNumber />

</Newpart>

<PartFailure>

<FailureType>

<Issue IssueTypeID= >

<Description />

</Issue>

</FailureType>

<Chargeable />

</PartFailure>

<FailureAnalyses />

<PartDisposition>

<Issue IssueTypeID=”13” >

<Description />

</Issue>

</PartDisposition>

<SalesOrderNumber />

<RMANumber />

<RMAReceivedDate >

<Year />

<Month />

<Day />

<Hour />

<Minute />

<Second />

<FormattedDate />

</RMARecievedDate>

<ChangeDate>

<Year />

<Month />

<Day />

<Hour />

<Minute />

<Second />

<FormattedDate />

</ChangeDate>

<StartingAge />

<TimeMetric1 />

 <HoursToFailure />

</RepairReplace>

Description

• The RepairReplace element is optional.

• The PartOrder (Integer) attribute is required.

PartOrder = 0 is a top level system, otherwise this controls the display line order in the repair replace section.

• The OldPart element is required. It must be a valid part, and can have an optional SerialHID element whose value matches an existing SerialHID.

• The SerialHID element links the Repair Replace Part to a position in a Serial System.

• The NewPart element is optional. If present it must be a valid part and can have an optional SerialHID element whose value matches an existing SerialHID.

• The PartFailure type element is optional. If present it must contain a FailureType element which must be a valid issue with an IssueTypeID listed below.

ID    Description                                  Chargeable Value
22    Incident Failure Type Chargeable                   “yes”
23    Incident Failure Type Non-Chargeable               “no”

• Failure Analyses are optional.

• See Failure Analysis import section.

• The PartDisposition element is optional. If present it must contain a valid issue with an IssueTypeID equal to 13 (Incident Parts Disposition).

 SalesOrderNumber is optional.

• The RMANumber (String) element is optional.

• The ChangeDate element is optional and if present must contain a valid date.

• The RMAReceivedDate element is optional and if present must contain a valid date.

• The StartingAge (Integer) element is optional.

• The HoursToFailure element is calculated and only used on export.

• The TimeMetric1 (Double) element is optional. TimeMetric1 will not be imported for RepairReplace elements with PartOrder equal to 0 (TopLevelPart). The time metric data for the top level part can be updated in the TopLevelPart element.