ALTADataSet Class

Instantiate this class to be able to fit an ALTA model from your raw data.

Constructors

• Sub New Creates a new class that can be used to fit a model from ALTA raw data.

Properties

• DatasetName Gets or set the name of the data set.
• GeneralSettings General settings used when fitting the model or finding the best fit.
• AnalysisSettings Settings used when fitting the model.
• FittedModel Model, fitted from the raw data. See cModel class for the list of its methods below.
• FailureCount Total number of failures in the data set.
• SuspensionCount Total number of suspensions in the data set.
• NumStresses Returns the number of stresses in the data set.
• StressRelation Returns the number of stresses in the data set.
• UseStress Gets or sets use stress value for a particular stress. This value is used in subsequent calculations and plots.

Events

• WeibullEvents Reference to a class that contains overridable methods for handling ALTA solver events.
• New ALTAEvents Reference to a class that contains overridable methods for handling ALTA solver events

Methods

• ClearDataSet Clears all data and fitted model. All analysis settings stay unchanged.
• AddStressDefinition Template:Adds a stress definition (column). The number of stresses in subsequent calls to AddFailure, AddSuspension etc. must be equal to the number of stress definitions in the data set.
• NumStresses Returns the number of stresses in the data set.
• StresRelation Sets or returns life-stress relationship for a particular stress.
• UseStress Sets or returns use stress value for a particular stress. This value is used in subsequent calculations and plots.
• AddStressProfile Adds a stress profile to the data set. It then can be used as a stress for Cumulative Damage model.
• AddFailure Stress() Adds a failure data point to the collection of data points in the data set.
• AddFailure Stress1 Adds a failure data point to the collection of data points in the data set.
• AddFailure Stress1,Stress2 Adds a failure data point to the collection of data points in the data set.
• AddSuspension Stress() Adds a suspension data point to the collection of data points in the data set.
• AddSuspension Stress1 Adds a suspension data point to the collection of data points in the data set.
• AddSuspension Stress1,Stress2 Adds a suspension data point to the collection of data points in the data set.
• AddFailureInterval Stress () Adds a failure interval data point to the collection of data points in the data set.
• AddFailureInterval Stress1 Adds a failure interval data point to the collection of data points in the data set.
• AddFailureInterval Stress1,Stress2 Adds a failure interval data point to the collection of data points in the data set.
• AddSuspensionInterval Stress() Adds a suspension interval data point to the collection of data points in the data set.
• AddSuspensionInterval Stress1 Adds a suspension interval data point to the collection of data points in the data set.
• AddSuspensionInterval Stress1,Stress2 Adds a suspension interval data point to the collection of data points in the data set.
• Calculate Fits a model from the raw data previously entered in the data set. Sets FittedModel property if successful. Clears it (sets to Nothing) in case of an error.