Template:Example: Published 3P Weibull Distribution Probability Plot Example

From ReliaWiki
Revision as of 21:14, 29 February 2012 by Harry Guo (talk | contribs) (Created page with '==Weibull Distribution Example 19: 3-Parameter Probability Plotting== From Dimitri Kececioglu, Reliability & Life Testing Handbook, Page 406 [20]. Estimate the parameters for t…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Weibull Distribution Example 19: 3-Parameter Probability Plotting

From Dimitri Kececioglu, Reliability & Life Testing Handbook, Page 406 [20].

Estimate the parameters for three-parameter Weibull, for a sample of ten units all tested to failure. The times-to-failure were recorded at 200; 370; 500; 620; 730; 840; 950; 1,050; 1,160; and 1,400 hours.

Published Results for Weibull Distribution Example 19

Published results (using probability plotting):

Example19formula.png

Computed Results for Weibull Distribution Example 19

Weibull++ computed parameters for rank regression on X are:

Compexample19formula.png

The small difference between the published results and the ones obtained from Weibull++ are due to the difference in the estimation method. In the publication the parameters were estimated using probability plotting (i.e. the fitted line was "eye-balled"). In Weibull++, the parameters were estimated using non-linear regression (a more accurate, mathematically fitted line). Note that γ in this example is negative. This means that the unadjusted for γ line is concave up, as shown next.


Example19formula6.11.png