Create Plots

<< Back to Tutorials Main Page

In the Weibull++ data set and ALTA data set tutorials, you learned how to use the Synthesis API to analyze a data set and obtain calculated results. In this tutorial, you'll use the Synthesis API to generate a plot of the results.

Note that this tutorial is for demonstration purposes only; it doesn't take efficiency into account and doesn't include any exception handling.

Prerequisites

This tutorial uses a Windows Form application that displays a plot at a click of a button. Before you begin, please create a Windows Form Application project, and add a Button and PictureBox control to the form.

Need help with creating Windows Forms? See this Microsoft tutorial.

Tutorial: Create a Probability Plot

The following example demonstrates how to use the Synthesis API to create a Weibull++ probability plot and display it in a Windows application. To run this example, paste the code to the Button Click event handler in your project, as shown in the example below. A discussion of the example follows.

The VBA version of the code sample is available here.

VB.NET

Imports SynthesisAPI 

Public Class Form1
   Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
 
  'Create a Weibull++ data set.  
   Dim WDS As New WeibullDataSet
   WDS.AddFailure(16, 1)
   WDS.AddFailure(34, 1)
   WDS.AddFailure(53, 1)  
   WDS.AddFailure(75, 1)
   WDS.AddFailure(93, 1)
   WDS.AddSuspension(120, 5)   

  'Analyze the data set using the 2-parameter Weibull distribution and  
  'the RRX analysis method. Keep all other analysis settings at default. 
   WDS.AnalysisSettings.Distribution = WeibullSolverDistribution.Weibull
   WDS.AnalysisSettings.Parameters = WeibullSolverNumParameters.MS_2Parameter
   WDS.AnalysisSettings.Analysis = WeibullSolverMethod.RRX
 
  'Analyze the data set. 
   WDS.Calculate()

  'Declare a new WAPlots object. 
   Dim WPlot As New WAPlots

  'Add the analyzed data set to the plot. 
   WPlot.AddDataset(WDS)

 'Create a probability plot and display it in the PictureBox. 
  PictureBox1.Image = WPlot.CreatePlot(WAPlotType.Probability)
  PictureBox1.SizeMode = PictureBoxSizeMode.AutoSize
 
   End Sub
End Class

Discussion

You'll first need an analyzed Weibull++ or ALTA data set before you can create a plot. The first three sections of code in this example demonstrate how to create and analyze a simple Weibull++ data set (for a full discussion, see this tutorial). From this data set, we'll create a plot.

  'Create a Weibull++ data set.  
   Dim WDS As New WeibullDataSet
   WDS.AddFailure(16, 1)
   WDS.AddFailure(34, 1)
   WDS.AddFailure(53, 1)  
   WDS.AddFailure(75, 1)
   WDS.AddFailure(93, 1)
   WDS.AddSuspension(120, 5)   

  'Analyze the data set using the 2-parameter Weibull distribution and  
  'the RRX analysis method. Keep all other analysis settings at default. 
   WDS.AnalysisSettings.Distribution = WeibullSolverDistribution.Weibull
   WDS.AnalysisSettings.Parameters = WeibullSolverNumParameters.MS_2Parameter
   WDS.AnalysisSettings.Analysis = WeibullSolverMethod.RRX

  'Analyze the data set. 
   WDS.Calculate()

Create a new WAPlots object to represent the plot and then use the AddDataset method to assign the data set to the plot.

  'Declare a new WAPlots object. 
   Dim WPlot As New WAPlots

  'Add the analyzed data set to the plot. 
   WPlot.AddDataset(WDS)

Use the CreatePlot method to create the plot. The type of plot it creates is specified by the WAPlotType enumeration. In this example, we've chosen a probability plot.

To display the plot, assign it to the Image property of the PictureBox. The SizeMode property is optional; it resizes the PictureBox to fit the image.

 'Create a probability plot and display it in the PictureBox. 
  PictureBox1.Image = WPlot.CreatePlot(WAPlotType.Probability)
  PictureBox1.SizeMode = PictureBoxSizeMode.AutoSize

Notes

For ALTA Data Sets

For ALTA data sets, you can create a use level probability plot based on a specified use stress level. Use the PlotUseStress(index) property to specify the use stress value to be plotted. The Index parameter is an integer that specifies the stress index, where 0 = first stress, 1 = second stress, etc.

For example, for an ALTA single-stress analysis:

 'Declare a new ALTADataSet object. 
   Dim ADS As New ALTADataSet

 'Add code to create an ALTA data set and analyze it. 
 ...   

  'Declare a new WAPlots object. 
   Dim APlot As New WAPlots
 
  'Add the analyzed data set to the plot. 
   APlot.AddDataset(ADS)

 'Create a use level probability plot for use stress = 200. 
   ADS.PlotUseStress(0) = 200   
   PictureBox1.Image = APlot.CreatePlot(WAPlotType.UseLevelProbability)
   PictureBox1.SizeMode = PictureBoxSizeMode.AutoSize

For Models

You can plot the results of any cModel object by using the WAPlots.AddModel method. For example:

 'Declare a new cModel object. 
  Dim model As New cModel

 'Add code to either create a new model or get an existing model from a Synthesis repository. 
 ... 
 
 'Declare a new WAPlots object. 
  Dim plot As New WAPlots
 
 'Add the model to the plot. 
  plot.AddModel(model)

References

• WAPlots Class
  • WAPlots.AddDataset Method
  • WAPlots.CreatePlot Method
• WAPlotType Enumeration