cModel Constructors

Member of: SynthesisAPI9.cModel

A parameterized constructor for the cModel class. (VB.NET only)

Syntax

cModel(ModelType, ModelCategory, ModelName, ParamArray ModelParams())

Parameters

ModelType

Required. The type of model (e.g., 2-parameter Weibull). Can be any of the model types listed in the table below. These constants are obtained from the ModelTypeEnum.

ModelCategory

Required. The model category (e.g., reliability model). Can be any ModelCategoryEnum constant.

ModelName

Required. String. The model name.

ModelParams()

Required. Double. An array of the model's parameters.

Model Type	Order of Parameters
Weibull	1 = Beta, 2 = Eta, 3 = Gamma
Normal	1 = Mean, 2 = Std
Lognormal	1 = LogMean, 2 = LogStd
Exponential	1 = Lambda, 2 = Gamma
G-Gamma	1 = Mu, 2 = K
Gamma	1 = Mu, 2 = K
Logistic	1 = Mu, 2 = Sigma
LogLogistic	1 = Mu, 2 = Sigma
Gumbel	1 = Mu, 2 = Sigma
Mixed Weibull	1 = Subpop1-Beta, 2 = Subpop1-Eta, 3 = Subpop1-Portion, 4 = Subpop2-Beta, 5 = Subpop2-Eta, 6 = Subpop2-Portion, 7= Subpop3-Beta, 8 = Subpop3-Eta, 9 = Subpop3-Portion, 10 = Subpop4-Beta, 11 = Subpop4-Eta, 12 = Subpop4-Portion
FixedUnreliability	If creating a constant model, enter a value for Parameter 1 and set Parameter 2 to zero (0) or nothing. If creating a dynamic model, enter the numeric ID of the variable resource for Parameter 2 and set Parameter 1 to zero (0) or nothing. If the variable does not exist, it creates a dynamic model with no predefined variable.
FixedDuration
FixedCost

Example

VB.NET

 'The following code creates a 2-parameter Weibull reliability model, 
 'with beta 1 and eta 100. The model name is "MyNewModel." 
 Dim ModelParams(1) As Double
 ModelParams(0) = 1
 ModelParams(1) = 100
 Dim newModel As New cModel(ModelTypeEnum.Weibull2,ModelCategoryEnum.Reliability, "MyNewModel", ModelParams)

 'Alternatively, you can create a new model using an in-line parameter list. 
 Dim newModel As New cModel(ModelTypeEnum.Weibull2, ModelCategoryEnum.Reliability, "MyNewModel", 1, 100)