cScheduledTask Class

From ReliaWiki
Jump to navigation Jump to search



SynAPI.png
Main Page
Resource Classes

The cScheduledTask class allows you to choose or create multiple scheduled tasks for the URD. Each task may be a preventive maintenance, inspections or on condition task. The tasks are displayed in their priority order, which is the order in which they will be performed.

To access/edit repository level information, including accessing/adding resources, please see Repository Class.

Constructors

  • cScheduledTask Creates a new scheduled task.

Properties

General

  • Name (as string) Gets or sets the task's Name.
  • TaskClass (as TaskClassEnum) Gets or sets the task's class (i.e., preventive task).
  • TaskTypeID (as integer) Gets or sets the numerical ID of the task's type (e.g., restoration, condition based).
  • DiagramIDs (as integer() ) Gets an array of numerical IDs for the diagrams the task is assigned to. (Note: Not shown in software.)

Task Scheduling

  • TaskFrequencyIDOrig (as TaskFrequencyEnum) Gets the enumeration that specifies when the task is performed.
  • TaskFrequencyUnitIDOrig (as integer) Gets the numerical ID for the original units of measurement of the intervals at which the task is performed. (Note: Not shown in software.)
  • TaskFrequencyUnitID (as integer) Gets the numerical ID for the current units of measurement of the intervals at which the task is performed.
  • TaskFrequencyValueOrig (as double) Gets or sets the original Fixed Interval when the task is performed based on item age. (Note: May be removed/hidden.)
  • TaskFrequencyValue (as double) Gets or sets the current Fixed Interval when the task is performed based on item age.
  • TaskFreqValueVariableIDOrig (as integer) Gets the numerical ID of the variable that originally represented the Fixed Interval when the task is performed based on item age. (Note: Not shown in software.)
  • TaskFreqValueVariableID (as integer) Gets the numerical ID of the variable that currently represents the Fixed Interval when the task is performed based on item age.)
  • Intervals (as double()) Gets an array of interval start values when the task is performed based on dynamic intervals.
  • PackageID (as integer) Gets the numerical ID of the task package that will override this task's scheduling properties (0 = no override).
  • GroupIDs (as integer()) Gets an array of numerical IDs for selected maintenance groups when task performance is based on maintenance groups. (Note:May be removed/hidden.)
  • MaintenanceTriggers (as integer) Gets the value of the maintenance trigger assigned to the task. (Note: May be removed/hidden.)

Basic Task Properties

  • DurationModelID (as integer) Gets the ID of the model that describes the duration of the task.
  • CrewIDs (as integer()) Gets the IDs of the crews assigned to the task.
  • SetCrewIDs (ByRef arr() as integer) Version 10 Only - Sets the crew IDs. Designed for VB6/VBA users. .NET users should use CrewIDs property instead. Returns the 0 based array of IDs.
  • GetCrewIDs (ByRef arr() as integer) Version 10 Only - Gets an array of the crew IDs. Designed for VB6/VBA users. .NET users should use CrewIDs property instead. Returns the 0 based array of IDs.
  • PoolID (as integer) Gets the IDs of the pool assigned to the task.

Task Consequences

  • BringSystemDown (as boolean) Gets or sets whether the task brings a system down.
  • BringItemDown (as boolean) Gets or sets whether the task brings an item down.
  • PerformTaskEvenIfItBringsSysDown (as boolean) Gets or sets whether the task should be performed if bringing the item down causes the system to go down.
  • PerformTaskEvenIfItemAlreadyFailed (as boolean) Gets or sets whether the task should be performed if it has already failed.

Restoration

  • ResFactorValue (as double) Gets or sets the corrective task's Restoration Amount (0.9 = 90% restoration).
  • ResFactorType (as TaskRestorationTypeEnum) Gets or sets the enumeration for the damage the restoration applies to (i.e., all damage or only damage since last repair.

Additional Costs to Consider

  • MiscCostModelID (as integer) Gets the numerical ID model that represents the task's Cost Per Task.
  • MiscCostPerTimeModelID (as integer) Gets the numerical ID of the model that represents the task's Downtime Rate.

Failure Detection

  • OnCondFailureDetectionThreshold (as double) Gets or sets the value for the task's failure detection threshold interval (0.9 = 90% percent of life.
  • OnCondUsePFInterval (as boolean) Gets or sets whether the prior to failure interval should be used.
  • OnCondPFInterval (as double) Gets or sets the value for the task's prior to failure interval.
  • OnCondPFIntervalUnitID (as integer) Gets or sets the numerical ID for the units of measurement applied to the prior to failure interval.

On Condition Task (Upon Detection)

  • OnCondDurationModelID (as integer) Gets the ID of the model that describes the duration of the task.
  • OnCondCrewIDs (as integer()) Gets the IDs of the crews assigned to the task.
  • OnCondPoolID (as integer) Gets the IDs of the pool assigned to the task.
  • OnCondBringSystemDown (as boolean) Gets or sets whether the task brings a system down.
  • OnCondBringItemDown (as boolean) Gets or sets whether the task brings an item down.
  • OnCondPerformTaskEvenIfItBringsSysDown (as boolean) Gets or sets whether the task should be performed if bringing the item down causes the system to go down.
  • OnCondPerformTaskEvenIfItemAlreadyFailed (as boolean) Gets or sets whether the task should be performed if it has already failed.
  • OnCondResFactorValue (as double) Gets or sets the corrective task's Restoration Amount (0.9 = 90% restoration).
  • OnCondResFactorType (as TaskRestorationTypeEnum) Gets or sets the enumeration for the damage the restoration applies to (i.e., all damage or only damage since last repair.

RCM

  • Status (as string) Gets or sets the status of the task.
  • PropInterval (as object) Gets or sets the task's Proposed Interval value.
  • PropIntervalUnitID (as integer) Gets or sets numerical ID for the units of measurement applied to the Proposed Interval.
  • RefDoc (as string) Gets or sets the reference document that provides more detailed information about the task.
  • Condition (as string) Gets or sets the condition that indicates that a failure will occur.
  • TaskZone (as string) Gets or sets the zone in which the task will be performed.
  • TaskAccess (as string) Gets or sets the access that will be required in order to perform the task.
  • UDT1 (as object) Gets or sets the Task User Date 1. Returns object of the System.Date type.
  • UDT2 (as object) Gets or sets the Task User Date 2. Returns object of the System.Date type.
  • UN1 (as object) Gets or sets the Task User Number 1. Returns object of the System.Double type.
  • UN2 (as object) Gets or sets the Task User Number 2. Returns object of the System.Double type.
  • UDD1 (as string) Gets or sets the Task User Drop-Down 1. (Limited to 50 characters.)
  • UDD2 (as string) Gets or sets the Task User Drop-Down 2. (Limited to 50 characters.)
Retrieved from "https://www.reliawiki.com/index.php?title=CScheduledTask_Class&oldid=57290"