Crow Extended Model for Repairable Systems Analysis Example

From ReliaWiki
Revision as of 20:54, 18 September 2023 by Lisa Hacker (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
RGA Examples Banner.png


New format available! This reference is now available in a new format that offers faster page load, improved display for calculations and images and more targeted search.

As of January 2024, this Reliawiki page will not continue to be updated. Please update all links and bookmarks to the latest references at RGA examples and RGA reference examples.



This example appears in the Reliability growth reference.


The failures and fixes of two repairable systems in the field are recorded. Both systems started operating from time 0. System 1 ends at time = 504 and system 2 ends at time = 541. All the BD modes are fixed at the end of the test. A fixed effectiveness factor equal to 0.6 is used. Answer the following questions:

  1. Estimate the parameters of the Crow Extended model.
  2. Calculate the projected MTBF after the delayed fixes.
  3. If no fixes were performed for the future failures, what would be the expected number of failures at time 1,000?

Solution

  1. The next figure shows the estimated Crow Extended parameters.
    Rga13.14.png
  2. The next figure shows the projected MTBF at time = 541 (i.e., the age of the oldest system).
    Rga13.15.png
  3. The next figure shows the expected number of failures at time = 1,000.
    Rga13.16.png
Retrieved from "https://www.reliawiki.com/index.php?title=Crow_Extended_Model_for_Repairable_Systems_Analysis_Example&oldid=66060"