BlockSim Examples: Difference between revisions
Jump to navigation
Jump to search
Lisa Hacker (talk | contribs) |
Lisa Hacker (talk | contribs) |
||
| Line 17: | Line 17: | ||
==Fault Tree Diagrams== | ==Fault Tree Diagrams== | ||
*[[AND Gate Example]] | *Simple Examples for Fault Tree Gates | ||
*[[OR Gate Example]] | **[[AND Gate Example]] | ||
*[[Voting OR Gate Example]] | **[[OR Gate Example]] | ||
**[[Voting OR Gate Example]] | |||
*[[Example_Using_Load_Sharing_Gates_in_Fault_Trees| Using Load Sharing Gates in Fault Trees]] | *[[Example_Using_Load_Sharing_Gates_in_Fault_Trees| Using Load Sharing Gates in Fault Trees]] | ||
*[[Same Example Modeled with RBDs or Fault Trees|Same Example Modeled with RBDs or Fault Trees (Modeling Failure Modes)]] | *[[Same Example Modeled with RBDs or Fault Trees|Same Example Modeled with RBDs or Fault Trees (Modeling Failure Modes)]] | ||
Revision as of 07:03, 17 August 2012
 |
Analytical Diagrams and Optimization
- Reliability Analysis of a Storage Cluster System - View it in HTML or Video
- Optimized Reliability Allocation - View it in HTML or Video
- Using RBDs for Modeling Failure Modes
- Analytical Diagram Plots
- Allocation Analysis
Fault Tree Diagrams
- Simple Examples for Fault Tree Gates
- Using Load Sharing Gates in Fault Trees
- Same Example Modeled with RBDs or Fault Trees (Modeling Failure Modes)
Simulation Diagrams
- RAM Analysis for Remote Telecommunications System
- Effect of Inspection Intervals
- Corrective Maintenance Triggered by Failure of a Subsystem
Phase Diagrams
- Aircraft Phases with Forced Landing
- Oil Refinery Phase Diagram Simulation
- Using Success/Failure Paths in Phase Diagrams
- Using Subdiagram Phase Blocks
State Change Triggers (SCTs)
- Using State Change Triggers for Standby Rotation
- Using State Change Triggers to Analyze Tire Maintenance
- Using State Change Triggers to Model Standby with Delay
- Using State Change Triggers to Model Two Standby Devices
- SCT: The State Upon Repair Option
- Demonstrating the "Default OFF unless SCT overridden" option
- Demonstrating the "Default ON unless SCT overridden" option
Throughput Analysis
Utilities
Due to continuous improvement in ReliaSoft software, the product images and step-by-step instructions featured in these resources may not always show the latest software version. Please visit www.hbkworld.com for the latest product info.