BlockSim Analytical Fault Tree and RBD Plot Examples: Difference between revisions
Lisa Hacker (talk | contribs) No edit summary |
Lisa Hacker (talk | contribs) No edit summary |
||
| Line 33: | Line 33: | ||
=====Static Reliability Importance(Tableau)===== | =====Static Reliability Importance (Tableau)===== | ||
[[Image:Static Reliability Importance (Tableau).png|center|700px|]] | [[Image:Static Reliability Importance (Tableau).png|center|700px|]] | ||
Revision as of 05:08, 26 July 2012
 |
New format available! This reference is now available in a new format that offers faster page load, improved display for calculations and images and more targeted search.
As of January 2024, this Reliawiki page will not continue to be updated. Please update all links and bookmarks to the latest references at BlockSim examples and BlockSim reference examples.
Let's assume that the three components A, B and C follow failure distributions Weibull(Beta=1.5,Eta=1000), Weibull(Beta=1.1, Eta=800) and Exponential(MTTF=3000). The reliability for each components and the system at mission time =100 hours is shown in the figure below.
There are several plots available for analytical RBD and fault tree analysis.
At the system level, there are four plots available as shown in the following:
Unreliability vs. Time
Reliability vs. Time
Probability Density Function
Failure Rate vs. Time
For the metrics, three kinds of reliability importance plots are available:
Reliability Importance vs. Time
Static Reliability Importance
Static Reliability Importance (Tableau)
.png)
At the block level, four kinds of plots are available:
Block Unreliability vs. Time
Block Reliability vs. Time
Block Probability Density Function
Block Failure Rate
