Template:Multiple systems with event codes: Difference between revisions
Jump to navigation
Jump to search
(Created page with '====Multiple Systems with Event Codes==== The Multiple Systems with Event Codes data type is used to analyze the failure data from a reliability growth test in which a number of …') |
|||
| Line 1: | Line 1: | ||
====Multiple Systems with Event Codes==== | ====Multiple Systems with Event Codes==== | ||
The Multiple Systems with Event Codes data type is used to analyze the failure data from a reliability growth test in which a number of systems are tested concurrently and the implemented fixes are tracked during the test phase. With this data type, all of the systems under test are assumed to have the same system hours at any given time. | The Multiple Systems with Event Codes data type is used to analyze the failure data from a reliability growth test in which a number of systems are tested concurrently and the implemented fixes are tracked during the test phase. With this data type, all of the systems under test are assumed to have the same system hours at any given time. The next figure shows an example of this type of data. | ||
<br> | <br> | ||
[[Image:rga3.10.png|thumb|center|400px|Advanced view for Multiple Systems with Event Codes]] | [[Image:rga3.10.png|thumb|center|400px|Advanced view for Multiple Systems with Event Codes]] | ||
Revision as of 20:02, 6 June 2012
Multiple Systems with Event Codes
The Multiple Systems with Event Codes data type is used to analyze the failure data from a reliability growth test in which a number of systems are tested concurrently and the implemented fixes are tracked during the test phase. With this data type, all of the systems under test are assumed to have the same system hours at any given time. The next figure shows an example of this type of data.
