BlockSim Examples: Difference between revisions
Jump to navigation
Jump to search
m (Updated link to storage cluster system example.) |
Lisa Hacker (talk | contribs) No edit summary |
||
| Line 8: | Line 8: | ||
==Examples== | ==Examples== | ||
===Analytical Diagrams and Optimization=== | ===Analytical Diagrams and Optimization=== | ||
* Reliability Analysis of a Storage Cluster System | * Reliability Analysis of a Storage Cluster System | ||
* Optimized Reliability Allocation | * Optimized Reliability Allocation | ||
*[http://www.reliasoft.com/BlockSim/examples/rc4/index.htm Using RBDs for Modeling Failure Modes] | *[http://www.reliasoft.com/BlockSim/examples/rc4/index.htm Using RBDs for Modeling Failure Modes] | ||
*[[BlockSim_Analytical_Fault_Tree_and_RBD_Plot_Examples| Analytical Diagram Plots]] | *[[BlockSim_Analytical_Fault_Tree_and_RBD_Plot_Examples| Analytical Diagram Plots]] | ||
Revision as of 20:42, 6 March 2023
 |
Reference Examples
- BlockSim Reference Examples (demonstrate how BlockSim solves a variety of problems from published references)
Examples
Analytical Diagrams and Optimization
- Reliability Analysis of a Storage Cluster System
- Optimized Reliability Allocation
- Using RBDs for Modeling Failure Modes
- Analytical Diagram Plots
- Allocation Analysis
- Time-Dependent System Reliability for Components in Series
- Time-Dependent System Reliability for Components in Parallel
- Using a Distribution to Approximate the System cdf
- Calculating System Reliability with Duty Cycles
- Load Sharing Configuration Example - Failure Modes Analysis
- Standby Configuration Example - Car Tires
- Reliability Importance Plot Example
Fault Tree Diagrams
- Simple Examples for Fault Tree Gates
- Same Example Modeled with RBDs or Fault Trees (Modeling Failure Modes)
Simulation Diagrams
- RAM Analysis for Remote Telecommunications System
- Effect of Inspection Intervals
- Corrective Maintenance Triggered by Failure of a Subsystem
- Life Cycle Cost Analysis Example
Phase Diagrams
- Aircraft Phases with Forced Landing
- Oil Refinery Phase Diagram Simulation
- Using Success/Failure Paths in Phase Diagrams
- Using Subdiagram Phase Blocks
- Using an Interval Maintenance Threshold in a Maintenance Phase
- Phase Throughput Examples
State Change Triggers (SCTs)
- Using State Change Triggers for Standby Rotation
- Using State Change Triggers to Analyze Tire Maintenance
- Using State Change Triggers to Model Standby with Delay
- Using State Change Triggers to Model Two Standby Devices
- SCT: The State Upon Repair Option
- Demonstrating the "Default OFF unless SCT overridden" option
- Demonstrating the "Default ON unless SCT overridden" option