BlockSim Examples: Difference between revisions
Jump to navigation
Jump to search
Lisa Hacker (talk | contribs) |
No edit summary |
||
| Line 39: | Line 39: | ||
*[[Example_Using_SCT_to_Analyze_Standby_with_Delay|Using State Change Triggers to Model Standby with Delay]] | *[[Example_Using_SCT_to_Analyze_Standby_with_Delay|Using State Change Triggers to Model Standby with Delay]] | ||
*[[Example_Using_SCT_to_Model_Two_Standby_Blocks|Using State Change Triggers to Model Two Standby Devices]] | *[[Example_Using_SCT_to_Model_Two_Standby_Blocks|Using State Change Triggers to Model Two Standby Devices]] | ||
*[[Example_Demonstrating_the_State_Upon_Repair_Option_for_SCT|SCT: The State Upon Repair Option]] | |||
*[[BlockSim_Example:_Default_OFF_unless_SCT_Overridden|Demonstrating the "Default OFF unless SCT overridden" option]] | *[[BlockSim_Example:_Default_OFF_unless_SCT_Overridden|Demonstrating the "Default OFF unless SCT overridden" option]] | ||
*[[BlockSim_Example:_Default_ON_unless_SCT_Overridden|Demonstrating the "Default ON unless SCT overridden" option]] | *[[BlockSim_Example:_Default_ON_unless_SCT_Overridden|Demonstrating the "Default ON unless SCT overridden" option]] | ||
Revision as of 07:30, 9 August 2012
 |
Analytical Diagrams and Optimization
- Simple Diagram Modeled as Both RBD and Fault Tree
- Analytical Diagram Plots
- Allocation Analysis
- Reliability Analysis of a Storage Cluster System - View it in HTML or Video
- Optimized Reliability Allocation - View it in HTML or Video
- Using RBDs for Modeling Failure Modes
Fault Tree Diagrams
- Simple Diagram Modeled as Both RBD and Fault Tree
- Using Load Sharing Gates in Fault Trees
- Same Example Modeled with RBDs or Fault Trees (Modeling Failure Modes)
Simulation Diagrams
- RAM Analysis for Remote Telecommunications System
- Effect of Inspection Intervals
- Corrective Maintenance Triggered by Failure of a Subsystem
Phase Diagrams
- Aircraft Phases with Forced Landing
- Oil Refinery Phase Diagram Simulation
- Using Success/Failure Paths in Phase Diagrams
- Using Subdiagram Phase Blocks
State Change Triggers (SCTs)
- Using State Change Triggers for Standby Rotation
- Using State Change Triggers to Analyze Tire Maintenance
- Using State Change Triggers to Model Standby with Delay
- Using State Change Triggers to Model Two Standby Devices
- SCT: The State Upon Repair Option
- Demonstrating the "Default OFF unless SCT overridden" option
- Demonstrating the "Default ON unless SCT overridden" option
Throughput Analysis
Utilities
Due to continuous improvement in ReliaSoft software, the product images and step-by-step instructions featured in these resources may not always show the latest software version. Please visit www.hbkworld.com for the latest product info.