Template:Bayesian test design: Difference between revisions
Lisa Hacker (talk | contribs) No edit summary |
Chris Kahn (talk | contribs) |
||
| Line 1: | Line 1: | ||
== Bayesian | == Bayesian Non-Parameteric Test Design == | ||
The regular nonparametric analysis performed based on either the binomial or the chi-squared equation was performed with only the direct system test data. However, if prior information regarding system performance is available, it can be incorporated into a Bayesian nonparametric analysis. This subsection will demonstrate how to incorporate prior information about system reliability and also how to incorporate prior information from subsystem tests into system test design. | The regular nonparametric analysis performed based on either the binomial or the chi-squared equation was performed with only the direct system test data. However, if prior information regarding system performance is available, it can be incorporated into a Bayesian nonparametric analysis. This subsection will demonstrate how to incorporate prior information about system reliability and also how to incorporate prior information from subsystem tests into system test design. | ||
Revision as of 18:53, 8 March 2012
Bayesian Non-Parameteric Test Design
The regular nonparametric analysis performed based on either the binomial or the chi-squared equation was performed with only the direct system test data. However, if prior information regarding system performance is available, it can be incorporated into a Bayesian nonparametric analysis. This subsection will demonstrate how to incorporate prior information about system reliability and also how to incorporate prior information from subsystem tests into system test design.
Assumption on System Reliability
If we assume the system reliablity follows a Beta distribution, the values of system reliability, R, confidence level, CL, number of units tested, n, and number of failures, r, are related by the following equation:
- [math]\displaystyle{ 1-CL=\text{Beta}\left(R,\alpha,\beta\right)=\text{Beta}\left(R,n-r+\alpha_{0},r+\beta_{0}\right) }[/math]
where Beta is the incomplete Beta function. If α0 and β0 are known, then any quantity of interest can be calculated using the remaining three. The next two examples demonstrate how to calculate α0 and β0 depending on the type of prior information available.