Template:Difference detection matrix: Difference between revisions
(Created page with 'The Difference Detection Matrix is used to graphically indicate the amount of test time required to detect a statistically significant difference in the mean lives of two separat…') |
No edit summary |
||
| Line 1: | Line 1: | ||
===Test Design Using Life Difference Detetion Matrix=== | |||
The Difference Detection Matrix is used to graphically indicate the amount of test time required to detect a statistically significant difference in the mean lives of two separate sample populations. The Difference Detection Matrix takes as inputs information about the samples and information about the testing setup. For each sample, the Difference Detection Matrix needs the size of the sample, the distribution to be assumed for the sample population’s life, and a parameter affecting the variance of each population’s life distribution (e.g., beta for Weibull, and sigma for Normal and Lognormal). The Difference Detection Matrix also needs to know what the maximum allowable test time is, and by what amount of time to increment to the mean lives to be compared. For example, in the design shown below, the mean lives are incremented by 300, up to a mean life of 3000. | The Difference Detection Matrix is used to graphically indicate the amount of test time required to detect a statistically significant difference in the mean lives of two separate sample populations. The Difference Detection Matrix takes as inputs information about the samples and information about the testing setup. For each sample, the Difference Detection Matrix needs the size of the sample, the distribution to be assumed for the sample population’s life, and a parameter affecting the variance of each population’s life distribution (e.g., beta for Weibull, and sigma for Normal and Lognormal). The Difference Detection Matrix also needs to know what the maximum allowable test time is, and by what amount of time to increment to the mean lives to be compared. For example, in the design shown below, the mean lives are incremented by 300, up to a mean life of 3000. | ||
Revision as of 16:27, 8 February 2012
Test Design Using Life Difference Detetion Matrix
The Difference Detection Matrix is used to graphically indicate the amount of test time required to detect a statistically significant difference in the mean lives of two separate sample populations. The Difference Detection Matrix takes as inputs information about the samples and information about the testing setup. For each sample, the Difference Detection Matrix needs the size of the sample, the distribution to be assumed for the sample population’s life, and a parameter affecting the variance of each population’s life distribution (e.g., beta for Weibull, and sigma for Normal and Lognormal). The Difference Detection Matrix also needs to know what the maximum allowable test time is, and by what amount of time to increment to the mean lives to be compared. For example, in the design shown below, the mean lives are incremented by 300, up to a mean life of 3000.
The last thing the Difference Detection Matrix needs is what amounts of testing are available. The lengths of testing are initialized automatically, but can easily be modified by simply clicking on the pulldown menu and entering the time desired. When you are ready to calculate new values, just press the calculate icon in the right-hand panel.
After matrix values have been calculated, their codes can be interpreted using the legend below the matrix. The legend shows what level of testing corresponds to each color and code. In the figure shown above, a mean life of design 1 of 900 hours can be told from a mean life of design 2 of 1800 hours after 1500 hours of testing (code 3). A black cell indicates that a statistically significant difference between the two populations’ mean lives cannot be detected with the resources available, either due to insufficient sample sizes or inadequate test time.