CScheduledTask Class

Member of: SynthesisAPI

Represents a scheduled task resource. The task may be a preventive maintenance, inspection or on condition task.

Constructors

Name	Description
cScheduledTask	Creates an instance of the cSheduledTask class.
cScheduledTask()	A parameterized constructor for the cScheduledTask class. (.NET only)

Methods

Name	Description
OnCondGetTeams	Returns an array teams required for the 'On condition' task.
OnCondSetTeams	Sets the teams required for the 'On condition' task.
GetPools	Returns an array of the Pool IDs and number of parts for all pools required for the task.
SetPools	Sets the Pool IDs and number of parts for all pools required for the task.
GetTeams	Returns an array teams required for the task.
SetTeams	Sets the teams required for the task.

Properties

Name	Description
BringItemDown	Indicates whether the task brings the item down. Boolean. Default value = True.
BringSystemDown	Indicates whether the task brings the system down. Boolean. Default value = False.
Condition	Gets or sets a description of the condition that indicates that a failure will occur (for reliability centered maintenance analysis), such as a threshold for a measurement of wear, vibration, etc. String.
DurationModelID	Gets or sets the numeric ID of the model that represents the duration of the task. Integer
GroupIDs()	Gets an array containing the numeric IDs of the selected maintenance groups when the task is performed based on maintenance groups. (.NET only) Long.
ID	Gets the numeric ID of the task. Integer.
Intervals()	Gets or sets an array containing the interval start values when the task is performed based on dynamic intervals. Double.
ItemApplication	Gets or sets the item's application. (Synthesis identifier) String
ItemCategoryID	Gets or sets the category ID. (Synthesis identifier) Integer
ItemComments	Gets or sets the comments. (Synthesis identifier) String
ItemDescription	Gets or sets the description. (Synthesis identifier) String
ItemKeywords	Gets or sets the keywords. (Synthesis identifier) String
ItemPartNumber	Gets or sets the part number. (Synthesis identifier) String
ItemSupplier	Gets or sets the supplier name. (Synthesis identifier) String
ItemVersion	Gets or sets the version number. (Synthesis identifier) String
MaintenanceTriggers	Gets or sets the value of the maintenance trigger assigned to the task. Integer. Can be any value from the TaskMaintenanceTriggerEnum enumeration or the sum of any combination of values from the enumeration (this allows you to get or set more than one trigger). Default value = 0 (no triggers)
MiscCostModelID	Gets or sets the numeric ID of the model that represents the task's cost per task. Applies to preventive and inspection tasks. Integer.
MiscCostPerTimeModelID	Gets or sets the numeric ID of the model that represents the task's downtime rate ($/Hr). Applies to preventive and inspection tasks. Integer.
Name	Gets or sets the task's name. String.
OCMiscCostModelID	Gets or sets the numeric ID of the model that represents the task's cost per task. Applies to on condition tasks upon detection. Integer.
OCMiscCostPerTimeModelID	Gets or sets the numeric ID of the model that represents the task's downtime rate($/Hr). Applies to on condition tasks upon detection.Integer.
OnCondBringItemDown	Indicates whether the task brings the item down. Applies to on condition tasks upon detection. Boolean. Default value = True.
OnCondBringSystemDown	Indicates whether the task brings the system down. Applies to on condition tasks upon detection. Boolean. Default value = False.
OnCondDurationModelID	Gets or sets the numeric ID of the model that represents the duration of the task. Applies to on condition tasks upon detection. Integer.
OnCondFailureDetectionThreshold	Gets or sets the value for the task's failure detection threshold interval (0.9 = 90% percent of life). Double. Default value = 0.9.
OnCondPFInterval	Gets or sets the value for the task's prior-to-failure (P-F) interval. Double. Default value = 100.
OnCondPFIntervalUnitID	Gets or sets the numeric ID of the unit of measurement applied to the P-F interval. Integer.
OnCondResFactorValue	Gets or sets the on condition task's restoration amount. A value of 1 indicates an "as good as new" condition," a value of 0 indicates an "as bad as old" condition. A value between 0 and 100 indicates partial restoration. Double. Default value = 1.
OnCondResFactorType	Gets or set a value from the TaskRestorationTypeEnum enumeration, which specifies the effect of the restoration. Default value = 1 (restores all accumulated damage).
OnCondTeams	Returns a List(Of TeamInfo) containing teams assigned for the 'On condition' task (in the order of priority). (.NET Only)
OnCondUsePFInterval	Indicates whether the prior-to-failure (P-F) interval should be used to detect imminent failures. Boolean. If true, specify a value for OnCondPFInterval; if false, specify a value for OnCondFailureDetectionThreshold. Default value = False.
PackageID	Gets the numeric ID of the task package that will override the task's scheduling properties (0 = no override). Integer.
PerformTaskEvenIfItBringsSysDown	Indicates whether the task should be performed if bringing the item down causes the system to go down. Boolean. Default value = True.
PerformTaskEvenIfItemAlreadyFailed	Indicates whether the task should be performed even if the item failed before the task was scheduled to occur. Boolean. Default value = False.
Pools	Returns the list containing spare pool ID and the number of parts for each pool assigned for the task as a new list of PoolInfo (.NET only). In case of duplicate entries (same pool ID), the latest entry takes preference.
ProjectID	Gets the numeric ID of the project the task belongs to. Integer.
PropInterval	Gets or sets the interval value that was initially proposed for the task (for reliability centered maintenance analysis). Variant.
PropIntervalUnitID	Gets or sets numeric ID for the unit of measurement applied to the proposed interval. Integer.
RefDoc	Gets or sets the description for the reference document that provides more detailed information about the task (for reliability centered maintenance analysis). String.
ResFactorType	Gets or sets a value from the TaskRestorationTypeEnum enumeration, which specifies the effect of the restoration. Default value = 1 (restores all accumulated damage).
ResFactorValue	Gets or sets the scheduled task's restoration amount. A value of 1 indicates an "as good as new" condition," a value of 0 indicates an "as bad as old" condition. A value between 0 and 100 indicates partial restoration. Double. Default value = 1.
Status	Gets or sets the status of the task (for reliability centered maintenance analysis). String.
TaskAccess	Gets or sets the access that will be required in order to perform the task (typically for aircraft MSG-3 analyses). String.
TaskClass	Gets or set one of the values of the TaskClassEnum, which specifies the task's class (e.g., preventive task, inspection or on condition). Default value = 0 (preventive task).
TaskFrequencyID	Gets or sets a value from the TaskFrequencyEnum, which specifies the frequency at which the task is performed. Default value = 5 (whenever system is down).
TaskFrequencyUnitID	Gets or sets the numeric ID of the unit of measurement of the intervals at which the task is performed. Integer.
TaskFrequencyValue	Gets or sets the fixed interval at which the task is performed. Double. Default value = 1.
TaskFreqValueVariableID	Gets or sets the numeric ID of the variable that represents the fixed interval at which the task is performed. Integer.
TaskTypeID	Gets or sets the numeric ID of the RCM++ or RBI task type (1 = the first task type defined in the repository). Integer. Default value = -1, which indicates no task type is available.
TaskZone	Gets or sets the zone of the system in which the task will be performed (aircraft MSG-3 analyses). String.
Teams	Returns the list containing teams assigned for the task (in the order of priority). List(Of TeamInfo). (.NET Only)
UDD1	Gets or sets the text in the first user-defined drop-down field. Only applicable to RCM++. (Limited to 50 characters.) String.
UDD2	Gets or sets the text in the second user-defined drop-down field. Only applicable to RCM++. (Limited to 50 characters.) String.
UDT1	Gets or sets the date in the first user-defined date field. Only applicable to RCM++. Variant.
UDT2	Gets or sets the date in the second user-defined date field. Only applicable to RCM++. Variant.
UN1	Gets or sets the value in the first user-defined number field. Only applicable to RCM++. Variant.
UN2	Gets or sets the value in the second user-defined number field. Only applicable to RCM++. Variant.
UT1	Gets or sets the date in the first user-defined text field. Only applicable to RCM++ and RBI. String.
UT2	Gets or sets the date in the second user-defined text field. Only applicable to RCM++ and RBI. String.
UT3	Gets or sets the date in the third user-defined text field. Only applicable to RCM++ and RBI. String.
UT4	Gets or sets the date in the fourth user-defined text field. Only applicable to RCM++ and RBI. String.
UT5	Gets or sets the date in the fifth user-defined text field. Only applicable to RCM++ and RBI. String.

See Also

• Repository.Task.AddScheduledTask Method
• Repository.Task.GetAllScheduledTasks Method
• Repository.Task.GetScheduledTask Method
• Repository.Task.UpdateScheduledTask Method