Template:BlockSim Overlay Plot Example: Difference between revisions

Latest revision as of 03:18, 20 August 2012

Redirect to:

@@ Line 1: / Line 1: @@
-[[Overlay Plot example]]
+#REDIRECT [[Overlay_Plot_Example]]
-===Overlay Plot===
-BlockSim gives you the ability to place results from more than one RBD, fault tree and/or phase diagram on a single plot using an overlay plot. You must have two or more analyzed diagrams, fault trees and/or phase diagrams within the current project in order to plot multiple diagrams in an overlay plot diagram.
-Consider two component A and B, with Weibull(Beta=1.5, Eta=1000) and Weibull(Beta=1.1, Eta=800) respectively. Next we will use overlay plot to plot their results in one plot.
-With mission time as 100 hours, the reliability of OR gate and AND gate are show in the figures below.
-[[Image:Overlay plot.png|500px|center|]]
-====Probability Density Function====
-The Probability Density Functions for AND gate and OR gate are are plotted in a overlay plot as figure below. The blue line is the AND gate and the black line is the OR gate.
-[[Image:Overlay plot - PDF.png|500px|center|]]
-====Reliability vs. Time====
-The reliability plot for both gates are in figure below.
-[[Image:Overlay plot - Reliability vs Time.png|500px|center|]]