Template:Complex Competing Failure Modes: Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
(Redirected page to Competing Failure Modes Analysis)
 
(6 intermediate revisions by one other user not shown)
Line 1: Line 1:
==Complex Failure Modes Analysis==
#REDIRECT [[Competing Failure Modes Analysis]]
In addition to being viewed as a series system, the relationship between the different competing failures modes can be more complex. After performing separate analysis for each failure mode, a diagram that describes how each failure mode can result in a product failure can be used to perform analysis for the item in question. Such diagrams are usually referred to as Reliability Block Diagrams (RBD) (for more on RBDs see ReliaSoft's System Analysis Reference and [[<http://www.reliasoft.com/BlockSim/>|ReliaSoft's BlockSim software]]).
 
A reliability block diagram is made of blocks that represent the failure modes and arrows and connects the blocks in different configurations. Note that the blocks can also be used to represent different components or subsystems that make up the product. Weibull ++ provides the capability to use a diagram to model, series, parallel, k-out-of-n configurations in addition to any complex combinations of these configurations.
 
In this analysis, the failure modes are assumed to be statistically independent. (Note: In the context of this reference, statistically independent implies that failure information for one failure mode provides no information about, i.e. does not affect, other failure mode). Analysis of dependent modes is more complex. Advanced RBD software such as ReliaSoft's BlockSim can handle and analyze such dependencies, as well as provide more advanced constructs and analyses (see http://www.ReliaSoft.com/BlockSim).
 
{{failure modes configurations}}

Latest revision as of 07:37, 29 June 2012

Redirect to:

Retrieved from "https://www.reliawiki.com/index.php?title=Template:Complex_Competing_Failure_Modes&oldid=25791"