Template:Mixed weibull, other uses: Difference between revisions

Latest revision as of 00:43, 15 August 2012

Redirect to:

@@ Line 1: / Line 1: @@
+#REDIRECT [[The_Mixed_Weibull_Distribution#Other_Uses_for_Mixed_Weibull]]
-===Mixed Weibull, Other Uses===
-====Reliability Bathtub Curves====
-A reliability bathtub curve is nothing more than the graph of the failure rate versus time, over the life of the product. In general, the life stages of the product consist of early, chance and wear-out. Weibull++ allows you to plot this by simply selecting the failure rate plot, as shown next.
-[[Image:ldachp10fig5.gif|thumb|center|500px| ]]
-====Determination of the Burn-in Period====
-If the failure rate goal is known, then the burn-in period can be found from the failure rate plot by drawing a horizontal line at the failure rate goal level and then finding the intersection with the failure rate curve. Next, drop vertically at the intersection, and read off the burn-in time from the time axis. This burn-in time helps insure that the population will have a failure rate that is at least equal to or lower than the goal after the burn-in period. The same could also be obtained using the Function Wizard and generating different failure rates based on time increments. Using these generated times and the corresponding failure rates, one can decide on the optimum burn-in time versus the corresponding desired failure rate.
-{{Example:2Subpop Mixed Weibull}}