Template:Multi-phase data: Difference between revisions

Latest revision as of 00:43, 24 August 2012

Redirect to:

@@ Line 1: / Line 1: @@
-===Multi-Phase Data===
+#REDIRECT [[RGA_Data_Types#.28Multi-Phase.29_Mixed_Data]]
-Reliability data can be analyzed across multiple phases. This is useful when an overall reliability growth program is planned and involves multiple test phases.
-<br>
-{{(multi-phase) failure times data}}
-====(Multi-Phase) Grouped Failure Times Data====
-This data type can be used for tests that span multiple phases and the exact failure times are unknown. Only the number of failures within a time interval are recorded, as shown in Figure CECErouped.
-<br>
-[[Image:rga3.16.png|thumb|center|400px|Multi-phase grouped failure times data]]
-====(Multi-Phase) Mixed Data====
-This data type can be used for tests that span multiple phases and it allows for configuration in groups, individual trial by trial, or a mixed combination of individual trials and configurations of more than one trial. An example of this data type can be seen in Figure Multi-phase mixed data.
-<br>
-[[Image:rga3.17.png|thumb|center|400px|Multi-phase mixed data]]
-<br>
-====Models for Multi-Phase Data====
-The Crow Extended - Continuous Evaluation model is used to analyze data across multiple phases and is presented in Chapter 10.