Template:System with Two Standby Blocks (SCT solution): Difference between revisions

Latest revision as of 09:31, 31 July 2012

Redirect to:

@@ Line 1: / Line 1: @@
-== Two Standby Blocks  ==
+#REDIRECT [[Example_Using_SCT_to_Model_Two_Standby_Blocks]]
-==== Purpose  ====
-The purpose of this example is to illustrate how to model a system with two standby devices with SCT.
-==== Statement ====
-Assume that there are four devices A, B, C and D in the system. The system begins with A and B as active devices and C and D as standby devices. If one of the active device fails, one of standby device will be activated. After the active device is restored, it would become a standby device. For example, when A fails, C or D would be activated and become a active device. After A finishes repair, it would become a standby device.
-==== BlockSim Solution====
-It is easy to model this system with standby container. However, standby container has some limitations in other application. Here we want to model this system with SCT.
-It is not possible to model this system directly with SCT. Here we present a alternative solution which can approximate this system.