CModel.Bounds FailureRate

Member of: SynthesisAPI.cModel

Calculates the bounds on the failure rate at a specified time for an associated cModel object. Returns a BoundsValues object that represents the confidence bounds.

You must first use the SetConfidenceLevel method to specify the confidence bound settings, and then use this method to perform the calculations. This method applies to published models only. Returns nothing if the calculation is performed on a non-published model.

Syntax

.Bounds_FailureRate( Time, CurrentAge, DutyCycle) 

Parameters

Time

Required. Double. The time at which to calculate the failure rate.

CurrentAge

Optional. Double. The current age. Default value = 0.

DutyCycle

Optional. Double. The duty cycle. Default value = 1.

Example

This example assumes that a published model with ID #47 exists in the repository.

VBA

 ... 

 'Get model ID #47 from project ID #1 in the repository. 
  Dim AModel As cModel
  MyRepository.Project.SetCurrentProject(1)  
  Set AModel = MyRepository.Model.GetModel(47)
 
 'Set the confidence level to 90% two-sided bounds. 
  Dim ErrorMsg As String
  Call AModel.SetConfidenceLevel(0.9, ConfBoundsSides_TwoSidedBoth, False, ErrorMsg)

 'Calculate the bounds on the model's failure rate at time = 100. 
  Dim ResultValue As BoundsValues
  Set ResultValue = AModel.Bounds_FailureRate(100)

 'Output sample: Display the results for the upper and lower confidence bounds. 
  MsgBox (" Upper bound: " & ResultValue.Upper & ", Lower bound: " & ResultValue.Lower)

VB.NET

 ... 

 'Get model ID #47 from project ID #1 in the repository. 
  Dim AModel As cModel
  MyRepository.Project.SetCurrentProject(1)  
  AModel = MyRepository.Model.GetModel(47)
 
 'Set the confidence level to 90% two-sided bounds. 
  Dim ErrorMsg As String
  AModel.SetConfidenceLevel(0.9, ConfBoundsSides.TwoSidedBoth, False, ErrorMsg)

 'Calculate the bounds on the model's failure rate at time = 100. 
  Dim ResultValue As BoundsValues
  ResultValue = AModel.Bounds_FailureRate(100)

 'Output sample: Display the results for the upper and lower confidence bounds. 
  MsgBox (" Upper bound: " & ResultValue.Upper & ", Lower bound: " & ResultValue.Lower)