CModel Constructors

Member of: SynthesisAPI.cModel

A parameterized constructor for the cModel class. (VB.NET only)

Syntax

cModel(ModelType, ModelCategory, ModelName, ParamArray ModelParams())

Parameters

ModelType

Required. The type of model (e.g., 2-parameter Weibull). Can be any of the model types listed in the table below. The model types are part of the ModelTypeEnum.

ModelCategory

Required. The model category (e.g., reliability model). Can be any ModelCategoryEnum constant.

ModelName

Required. String. The model name.

ModelParams()

Required. Double. An array of the model's parameters.

Model Type	Value	Order of Parameters
Weibull1 Weibull2 Weibull3	100 101 102	Beta, Eta, Gamma
MixedWeibull2 MixedWeibull3 MixedWeibull4	103 104 105	Subpop1-Beta, Subpop1-Eta, Subpop1-Portion, Subpop2-Beta, Subpop2-Eta, Subpop2-Portion, Subpop3-Beta, Subpop3-Eta, Subpop3-Portion, Subpop4-Beta, Subpop4-Eta, Subpop4-Portion
Exponential1 Exponential2	106 107	Lambda, Gamma
Normal	108	Mean, Std
Lognormal	109	LogMean, LogStd
GenGamma	110	Mu, K
Gamma	111	Mu, K
Logistic	112	Mu, Sigma
LogLogistic	113	Mu, Sigma
Gumbel	114	Mu, Sigma
FixedUnreliability	0	If creating a constant model, enter a value for Parameter 1 and set Parameter 2 to zero (0) or nothing. If creating a dynamic model, enter the numeric ID of the variable resource for Parameter 2 and set Parameter 1 to zero (0) or nothing. If the variable does not exist, it creates a dynamic model with no predefined variable.
FixedDuration	1
FixedCost	2

Example

VB.NET

 'The following code creates a 2-parameter Weibull reliability model, 
 'with beta 1 and eta 100. The model name is "MyNewModel." 
 Dim ModelParams(1) As Double
 ModelParams(0) = 1
 ModelParams(1) = 100
 Dim newModel As New cModel(ModelTypeEnum.Weibull2,ModelCategoryEnum.Reliability, "MyNewModel", ModelParams)

 'Alternatively, you can create a new model using an in-line parameter list. 
 Dim newModel As New cModel(ModelTypeEnum.Weibull2, ModelCategoryEnum.Reliability, "MyNewModel", 1, 100)