Template:Time-to-failure data: Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
(Redirected page to RGA Data Types)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
===Time-to-Failure Data===
#REDIRECT [[RGA_Data_Types]]
Time-to-failure (continuous) data is the most commonly observed type of reliability growth data. It involves recording the times-to-failure for the unit(s) under test. Time-to-failure data can be applied to a single unit or system or to multiple units or systems. There are multiple data entry schemes for this data type and each is presented next.
{{failure times data}}
 
 
{{grouped failure times}}
 
{{multiple systems (known operating times)}}
 
{{multiple systems (concurrent operating times)}}
 
{{multiple systems (concurrent operating times)-using dates}}
 
{{multiple systems with event codes}}
 
====Models for Time-to-Failure (Continuous) Data====
The following models can be used to analyze time-to-failure (continuous) data sets. Models and examples using the different data types are discussed in later chapters.
 
<br>
:1) [[RGA Chapter 4|Duane]]
<br>
:2) [[RGA Chapter 5|Crow-AMSAA (NHPP)]]
<br>
:3) [[RGA Chapter 9|Crow Extended]]
<br>
:4) [[RGA Chapter 10|Crow Extended - Continuous Evaluation]]
<br>

Latest revision as of 01:05, 24 August 2012

Redirect to:

Retrieved from "https://www.reliawiki.com/index.php?title=Template:Time-to-failure_data&oldid=33706"