General Examples & Case Studies: Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
No edit summary
(Redirected page to ALTA Examples)
 
(10 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{template:ALTABOOK|12}}
#REDIRECT[[ALTA_Examples]]
In this chapter we present some application examples utilizing ReliaSoft's ALTA. We assume that you have previously consulted the ALTA User's Guide and familiarized yourself with the software.
 
 
{{Paper Clip Example}}
 
 
{{Electronic Devices Example}}
 
 
{{Mechanical Components Example}}
 
 
{{Tensile Components Example}}
 
 
{{Confidence Bounds Example}}
 
 
==ACME Example==
ACME manufacturing has implemented an accelerated testing program for their new design. A total of 40 units were tested at four different pressure levels. The operating stress level is 170 psi.
 
<br>
{|style= border="1" align="center"
|-
!Stress Level, psi
!220 psi
!230 psi
!240 psi
!250 psi
|-
| ||165||93||72||26
|-
| ||177||106||73||44
|-
| ||238||156||99||63
|-
| ||290||170||124||68
|-
|''Times-to-failure, hr''||320||185||134||69
|-
| ||340||214||150||72
|-
| ||341||220||182||77
|-
| ||380||236||186||96
|-
| ||449||252||190||131
|-
| ||544||288||228||140
|}
 
 
Do the following:
 
 
1) Determine the parameters of the inverse power law Weibull model.
 
 
2) Obtain the use level probability plot with 90% 2-sided confidence bounds on time.
 
 
3) Obtain the Life vs. Stress plot with 90% 2-sided confidence bounds.
 
<br>
===Solution===
 
 
1) The parameters of the IPL-Weibull model are estimated to be:
 
 
::<math>\begin{align}
 
  \beta =\ & 3.009236 \\
 
  K=\ & 3.267923E-27 \\
 
  n=\ & 10.218104 
 
\end{align}</math>
 
 
2) The use level probability plot is shown next.
<br>
<br>
[[Image:new_7.gif|thumb|center|300px|The probability plot at a use stress level.]]
<br>
The confidence bounds on time are the Type 1 bounds (Time Bounds) in ALTA.
 
<br>
[[Image:new_9.gif|thumb|center|300px|The probability plot at a use stress level with 90% Type I confidence bounds.]]
<br>
 
3) Similarly, the Life vs. Stress plot with the confidence bounds can be obtained.
 
<br>
 
==Circuit Boards Example==
 
Twenty-seven circuit boards were tested with temperature as the accelerated stress (or stimuli). The goal was to estimate the reliability after 10 years at 100ºC. The circuit boards were tested and the following data obtained:
 
<br>
{|style= border="1" align="center"
|-
! colspan="3" align="center"|Test Chamber Temperature 463K
|-
!# of units
!Time, hr
!Observation
|-
| align="center" | 1 ||align="center" | 2,403||align="center" | Failure
|-
| align="center" | 1 ||align="center" | 2,668||align="center" | Unrelated Failure
|-
| align="center" | 1 ||align="center" | 3,669||align="center" | Test Fixture Failure
|-
| align="center" | 1 ||align="center" | 3,863||align="center" | Failure
|-
| align="center" | 2 ||align="center" | 4,400||align="center" | Test Fixture Failure
|-
| align="center" | 2 ||align="center" | 4,767||align="center" | Failure
|-
| align="center" | 1 ||align="center" | 5,219||align="center" | Failure
|-
| align="center" | 4 ||align="center" | 5,276||align="center" | Power Surge Failure
|-
| align="center" | 2 ||align="center" | 7,517||align="center" | Failure
|-
| align="center" | 1 ||align="center" | 7,840||align="center" | Failure
|-
| align="center" | 2 ||align="center" | 8,025||align="center" | Failure
|-
| align="center" | 1 ||align="center" | 8,571||align="center" | Removed - Test Terminated
|}
 
<br>
{|style= border="1" align="center"
|-
! colspan="3" align="center"|Test Chamber Temperature 488K
|-
!# of units
!Time, hr
!Observation
|-
| align="center" | 2 ||align="center" | 346||align="center" | Power Regulator Failure
|-
| align="center" | 1 ||align="center" | 1,416||align="center" | Failure
|-
| align="center" | 1 ||align="center" | 2,197||align="center" | Unrelated Failure
|-
| align="center" | 1 ||align="center" | 2,533||align="center" | Failure
|-
| align="center" | 1 ||align="center" | 2,630||align="center" | Failure
|-
| align="center" | 1 ||align="center" | 2,701||align="center" | Test Fixture Failure
|-
| align="center" | 1 ||align="center" | 3,000||align="center" | Failure
|-
| align="center" | 1 ||align="center" | 3,489||align="center" | Failure
|-
| align="center" | 1 ||align="center" | 6,720||align="center" | Removed - Test Terminated
|}
 
<br>
 
 
The data were entered in ALTA and analyzed utilizing an Arrhenius-Weibull model. Note that all units that did not fail in the test but failed for unrelated reasons were entered as suspensions. The reliability after 10 years at 100ºC is 45.67% as shown in the next figure.
<br>
<br>
[[Image:pv_ex7_5.gif|thumb|center|300px|Reliability plot at use stress level]]
<br>
 
==Electronic Components Example==
 
An electronic component was redesigned and was tested to failure at three different temperatures. Six units were tested at each stress level. At the 406K stress level however, a unit was removed from the test due to a test equipment failure which led to a failure of the component. A warranty time of one year is to be given, with an expected return of 10% of the population. The times-to-failure and test temperatures are given next:
 
<br>
<br>
[[Image:11_8ex.gif|thumb|center|300px|]]
<br>
 
 
The operating temperature is 356K. Using the Arrhenius-Weibull model, determine the following:
 
 
1) Should the first failure at 406K be included in the analysis?
 
 
2) Determine the warranty time for a 90% reliability.
 
 
3) Determine the 90% lower confidence limit on the warranty time.
 
 
4) Is the warranty requirement met? If not, what steps should be taken?
 
 
5) Repeat the analysis with the unrelated failure included. Is there any difference?
 
 
6) If the unrelated failure occurred at 500 hr, should it be included in the analysis?
 
 
===Solution===
 
 
1) Since the failure occurred at the very beginning of the test and for an unrelated reason, it can be omitted from the analysis. If it is included it should be treated as a suspension and not as a failure.
 
 
2) The first failure at 406K was neglected and the data were analyzed using ALTA. The following parameters were obtained:
 
 
::<math>\begin{align}
 
 
\beta =\ & 2.965820 \\
 
 
B=\ & 10679.567542 \\
 
 
C=\ & 2.396615\cdot {{10}^{-9}} 
 
 
\end{align}</math>
 
 
The use level probability plot (at 356K) can then be obtained. The warranty time for a reliability of 90% (or an unreliability of 10%) can be estimated from this plot as shown next.
 
<br>
[[Image:issue.gif|thumb|center|300px| The probability plot at use stress level.]]
 
<br>
This estimate can also be obtained from the Arrhenius plot (a Life vs. Stress plot). The 10th percentile (time for a reliability of 90%) is plotted versus stress. This type of plot is useful because a time for a given reliability can be determined for different stress levels.
 
<br>
[[Image:example_1_life_vs_stress.gif|thumb|center|300px|10% unreliability vs stress.]]
 
<br>
A more accurate way to determine the warranty time would be to use ALTA's Quick Calculation Pad (QCP). By selecting the Reliable Life option from in the QCP and entering 356 for the temperature and 0.9 for the required reliability, a reliable life of 11,977.792719 hr can be determined, as shown next:
 
<br>
[[Image:ex1_qcp.gif|thumb|center|300px|]]
 
<br>
3) The warranty time for a 90% reliability was estimated to be approximately 12,000 hr. This is above the 1 year (8,760 hr) requirement. However, this is an estimate at the 50% confidence level. In other words, 50% of the time life will be greater than 12,000 hr and 50% of the time life will be less. A known confidence level is therefore crucial before any decisions are made. Using ALTA, confidence bounds can be plotted on both probability and Arrhenius plots. In the following use level probability plot, the 90% lower confidence level (LCL) is plotted. Note that percentile bounds are Type 1 confidence bounds in ALTA.
 
<br>
[[Image:example_1_use_prob_plot_with_cb.gif|thumb|center|300px|The use level probability plot with the Type I 90% lower bound.]]
 
<br>
An estimated 4,437 hr warranty time at a 90% lower confidence level was obtained from the use level probability plot. This means that 90% of the time, life will be greater than this value. In other words, a life of 4,437 hr is a bounding value for the warranty.
 
<br>
The Arrhenius plot with the 90% lower confidence level is shown next.
 
<br>
[[Image:example_1_life_vs_stress_with_cb.gif|thumb|center|300px|Life vs Stress plot with the 90% lower confidence level.]]
 
 
Using the QCP and specifying a 90% lower confidence level, a warranty time of 4436.5 hr is estimated, as shown next.
<br>
<br>
[[Image:ex1_qcp2.gif|thumb|center|300px|]]
 
<br>
4) The warranty time for this component is estimated to be 4,436.5 hr at a 90% lower confidence bound. This is much less than the 1 year warranty time required (almost 6 months). Thus the desired warranty is not met. In this case, the following four options are available:
 
 
:a) Redesign.
 
:b) Reduce the confidence level.
 
:c) Change the warranty policy.
 
:d) Test additional units at stress levels closer to the use level.
 
 
5) Including the unrelated failure of 0.3 hr at 406 K (by treating it as a suspension at that time), the following results are obtained:
 
::<math>\begin{align}
 
  \beta =\ & 2.965804 \\
 
  B=\ & 10679.566625 \\
 
  C=\ & 2.396619\cdot {{10}^{-9}} 
 
  \end{align}</math>
 
 
These results are essentially identical to the ones with the unrelated failure excluded. A small difference can be seen only if more significant digits are considered. The warranty time with the 90% lower 1-sided confidence bound was estimated to be:
 
 
::<math>\begin{align}
 
  T=\ & 11977.729145\text{ hr} \\
 
  {{T}_{L}}=\ & 4436.462084\text{ hr} 
 
\end{align}</math>
 
 
Again, the difference is negligible. This is due to the very early time at which this unrelated failure occurred.
 
 
6) The analysis is repeated treating the unrelated failure at 500 hr as a suspension, with the following results:
 
 
::<math>\begin{align}
 
  \beta =\ & 3.022714 \\
 
  B=\ & 10959.523204 \\
 
  C=\ & 1.23808\cdot {{10}^{-9}} 
 
\end{align}</math>
 
 
In this case, the results are very different. The warranty time with the 90% lower 1-sided confidence bound is estimated to be:
 
 
::<math>\begin{align}
  T=\ & 13780.208409\text{ hr} \\
  {{T}_{L}}=\ & 5303.672050\text{ hr} 
\end{align}</math>
 
 
It can be seen that in this case, it would be a mistake to neglect the unrelated failure. By neglecting this failure, we would actually underestimate the warranty time. The important observation in this example is that every piece of life information is crucial. In other words, unrelated failures also provide information about the life of the product. An unrelated failure occurring at 500 hr indicates that the product has survived for that period of time under the particular stress level, thus neglecting it would be a mistake. On the other hand it would also be a mistake to treat this data point as a failure, since the failure was caused by a test equipment failure.
 
==Voltage Step-Stress Example==
 
An electronic component was subjected to a voltage stress, starting at 2V (use stress level) and increased to 7V in stepwise increments. The following steps, in hours, were used to apply stress to the products under test: 0 to 250, 2V; 250 to 350, 3V; 350 to 370, 4V; 370 to 380, 5V; 380 to 390, 6V; and 390 to 400, 7V. This profile is represented graphically next.
<br>
<br>
[[Image:ALTA14.20.gif|thumb|center|300px|]]
<br>
 
The objective of this test was to determine the  <math>B10</math>  life of these components at the normal use stress level of 2V.
<br>
In this experiment, the overall test time was 385 hrs. If the test had been performed at use conditions, one would expect the test duration to be approximately 1700 hrs if the test were run until all units failed.
<br>
Eleven units were available for the test. All eleven units were tested using the same stress profile. Units that failed were removed from the test and their total time on test recorded. The following times-to-failure were observed in the test, in hours: 280, 310, 330, 352, 360, 366, 371, 374, 378, 381 and 385.
 
 
===Solution===
 
 
After creating a Standard Folio for a single stress (voltage), the analyst added a Stress Profile under Tools in the Project Manager to create the stress profile for this experiment. In ALTA's stress profile, you can define any stress profile in segments. The stress applied during these segments can be a constant value (as is the case in this step example) or defined as a function of a time variable (t). The stress profile for this analysis is displayed next.
<br>
<br>
[[Image:chp14-65.gif|thumb|center|400px|]]
<br>
[[Image:ALTA14.21.gif|thumb|center|400px|The voltage test profile as in ALTA.]]
<br>
 
The times-to-failure data are entered in the ALTA Standard Folio with the following analysis options selected: cumulative damage power life-stress relationship and Weibull for the underlying life distribution. The ALTA Standard Folio with the data entered and the estimated parameters is shown next. Notice that the voltage step-stress profile has been assigned to each data point.
 
<br>
[[Image:chp14-66.gif|thumb|center|400px|]]
 
 
The  <math>B10</math>  life at the 2V use stress level, can be calculated with ALTA's Quick Calculation Pad (QCP), as shown next.
 
 
[[Image:Ch12-Ex9-4.gif|thumb|center|400px|]]
 
<br>
 
==Automotive Step-Stress Example==
 
 
Consider a test in which multiple stresses were applied simultaneously to a particular automotive part in order to precipitate failures more quickly than they would occur under normal use conditions. The engineers responsible for the test were able to quantify the combination of applied stresses in terms of a "percentage stress" as compared to typical stress levels (or assumed field conditions). In this scenario, the typical stress (field or use stress) was defined as 100% and any combination of the test stresses was quantified as a percentage over the typical stress. For example, if the combination of stresses on test was determined to be two times higher than typical conditions, then the stress on test was said to be at 200%.
 
<br>
The test was set up and run as a step-stress test (i.e. the stresses were increased in a stepwise fashion) and the time on test was measured in hours. The step-stress profile used was as follows: until 200 hours, the equivalent applied stress was 125%; from 200 to 300 hrs, it was 175%; from 300 to 350 hrs, it was 200% and from 350 to 375 hrs, it was 250%. The test was terminated after 375 hours and any units that were still running after that point were right-censored (suspended).
 
<br>
Additionally, and based on prior analysis/knowledge, the engineers also stated that each hour on test under normal use conditions (i.e., at 100% stress measure) was equivalent to approximately 100 miles of normal driving. The test was conducted and the following times-to-failure and times-to-suspension under the stated step-stress profile were observed (note that + indicates a non-failed unit, i.e., suspension): 252, 280, 320, 328, 335, 354, 361, 362, 368, 375+, 375+, 375+.
 
<br>
After performing failure analysis on the failed parts, it was determined that the failure that occurred at 328 hrs was due to mechanisms other than the ones considered. That data point was therefore identified as a suspension in the currently analysis. The modified data set for this analysis was: 252, 280, 320, 328+, 335, 354, 361, 362, 368, 375+, 375+, 375+.
 
<br>
The test objective was to estimate the  <math>B1</math>  life for the part (i.e. time at which reliability is equal to 99%) at the typical operating conditions (i.e., Stress=100%), in miles.
 
 
===Solution===
 
 
Utilizing ALTA, the analyst first created a Standard Folio for non-grouped time-to-failure and time-to-suspension data and added a Stress Profile under Tools in the Project Manager to define the stress profile, as shown next.
<br>
<br>
[[Image:autoexampleprofile.gif|thumb|center|400px|]]
 
<br>
Once the profile was defined, the analyst entered the observed times, their state (i.e., failed F or non-failed S) and a reference to the profile used in the ALTA Standard Folio. The analyst selected the cumulative damage life-stress relationship (to use a time-varying stress) based on a power model (since the effect of the stress was deemed to be mechanical and more appropriately modeled by a power function). The Weibull distribution was selected as the underlying life distribution. Additionally, note that the use stress was set to 100 and all results were then extrapolated to the typical stress level. The Standard Folio and the selected model is shown next.
<br>
<br>
[[Image:autoexamplefolio.gif|thumb|center|400px|]]
<br>
 
The estimated parameters are shown next.
<br>
<br>
[[Image:autoexampleresults.gif|thumb|center|400px|]]
<br>
 
The last part remaining was to determine the  <math>B1</math>  life at the part's use stress level. Using the QCP, the  <math>B1</math>  life was found to be 658 hours, as shown next.
<br>
<br>
[[Image:autoexampleqcp.gif|thumb|center|400px|]]
<br>
 
Based on the given multiplier, the  <math>B1</math>  life in miles would then be 658 test-hr*100 (miles/test-hr)= 65,800 miles.
 
 
The  <math>B1</math>  life can also be obtained from the use level probability plot, as shown next.
<br>
<br>
[[Image:autoexampleplot.gif|thumb|center|400px|]]
<br>
 
==Interval Data Example==
A sample of and electronic device was tested in two testing chambers set at different temperatures and monitored on a weekly basis. The test was performed continuously for 15 weeks. 50 units were put in each chamber. The goal of the test is to estimate the 90% lower bound on the  <math>B10</math>  life (in hours) of the electronic device. The following figure represents the test results, it shows the test results entered in ALTA in an interval data format. The normal use condition is assumed to be 300K.
 
<br>
[[Image:chapter14_80.gif|thumb|center|400px|]]
<br>
 
===Solution===
Assuming that the failure times of the devices follow a Weibull distribution and that the Arrhenius model is an adequate life-stress relationship, we obtain the following estimated model parameters:
 
 
::<math>\begin{align}
\beta =\ & 3.425937 \\
B=\ & 1488.412639 \\
C=\ & 24.059577 
\end{align}</math>
 
 
The next figure show the probability lines at the different stress levels along with the extrapolated use level probability line.
 
<br>
[[Image:intervaldataproblines.gif|thumb|center|400px|Probability lines at the different test stress levels with the extrapolated use level probability line.]]
<br>
The following is the life versus stress plot showing the <math>B10</math>  life line.
 
<br>
[[Image:ch14-23.gif|thumb|center|400px|Life vs. Stress with the ''B''10 life line (bottom).]]
<br>
The 90% lower bound on the  <math>B10</math>  life can be estimated as follows.
<br>
<br>
[[Image:intervalb10qcp.gif|thumb|center|400px|]]
<br>
<math></math>

Latest revision as of 04:26, 15 August 2012

Redirect to:

Retrieved from "https://www.reliawiki.com/index.php?title=General_Examples_%26_Case_Studies&oldid=31954"