Template:Target reliability estimator: Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
(Redirected page to Target Reliability Tool)
 
(18 intermediate revisions by 2 users not shown)
Line 1: Line 1:
==Target Reliability Tool==
#REDIRECT [[Target_Reliability_Tool]]
 
Product reliability affects total product costs in multiple ways. Increasing reliability increases the initial cost of production but decreases other costs incurred over the life of the product. For example, increased reliability results in lower warranty and replacement costs for defective products. Increased reliability also results in greater market share because satisfied customers typically become repeat customers and recommend reliable products to others. A minimal total product cost can be determined by calculating the optimum reliability for such a product. The Target Reliability tool in Weibull++ does this by minimizing the sum of lost sales costs, warranty costs and manufacturing costs.
 
===Cost Factors in Determining Target Reliability===
 
'''Lost Sales Cost'''
 
The lost sales cost is caused due to lost market share. It is caused by customers choosing to go elsewhere for goods and services. The lost sales cost depends on the total market value for a product and the actual sales revenue of a product.
 
\begin{equation} \text{Lost Sales Cost}=\text{Max}\{0, \text{Total Market Value}–\text{Sales Revenue}\} \end{equation}
 
In Weibull++, we assume the total potential market value is the product of maximum market potential (number of units that could be sold) and the best unit sale price.
 
\begin{equation} \text{Total Market Value}=\text{Maximum Market Potential}\times\text{Best Market Unit Sale Price} \end{equation}
 
For example, if the maximum number of units demanded by the market is 100,000 and the best market unit sale price is $12.00, then the total market value would be:
 
\begin{equation} 100,000\times \$12.00=\$1,200,000.00 \end{equation}
 
Calculating sales revenue requires knowledge of market share and unit sale price. The function for market share is given by the equation:
 
<center><math>{{f}_{Market\_Share}}(R)=1-{{e}^{-{{\left( \frac{R}{a} \right)}^{b}}}}</math></center>
 
where ''a'' and ''b'' are parameters fitted to market share data, and ''R'' is the product reliability.
 
 
The function for '''unit sale price''' is given by:
 
<center><math> f_{Sale\_Price}\left(R\right)=b\times e^{a\cdot R} </math> </center>
 
where ''a'' and ''b'' are parameters fitted to data, and ''R'' is the product reliability.
 
 
As a function of reliability, ''R'', sales revenue is then calculated as:
 
:: \begin{equation}\text{Sales Revenue}\left(R\right)=\text{Total Market Value}\times\text{Market Share}\left(R\right)\times\text{Unit Price}\left(R\right) \end{equation}
 
Once the total market value and the sales revenue are obtained, they can then be used to calculate the lost sales cost using the formula given at the beginning of this section.
 
 
'''Production  Cost'''
 
Production cost is a function of total market value, market share and manufacturing cost per unit. The function <math>(f_{Production\_Cost}(R))</math> for '''production cost per unit''' is given by:
 
<center> <math>f_{Production\_Cost} (R)=b\times e^{\frac{a}{\left(1-R\right)}}</math> </center>
 
where ''a'' and ''b'' are parameters fitted to data, and ''R'' is the product reliability.
 
Using the substitution of variable <math> R'=\frac{1}{1-R} </math> results in the equation:
 
<center> <math> f_{Production\_Cost}\left(R'\right)=b\times e^{a\cdot R'} </math> </center>
 
for which the parameters ''a'' and ''b'' can be determined using simple regression tools such as the functions in the [[Degradation Data Analysis]] in Weibull++.
 
'''Warranty Cost'''
 
Warranty cost is a function of total market value, market share, reliability and cost per failure. The function of '''cost per failure''' <math>(f_{Failure\_Cost}(R))</math> is given by:
 
<center> <math>f_{Failure\_Cost}(R)=b\times e^{a\cdot R}</math> </center>
 
where ''a'' and ''b'' are parameters fitted to data. For a given reliability value, ''R'', the warranty cost is given by:
\begin{equation}\text{Warranty Cost}\left(R\right)=\text{Total Market Value}\times \text{Market Share}\left(R\right)\times\left(1-R\right)\times\text{Cost Per Failure}\left(R\right)
\end{equation}
 
 
'''Unreliability Cost'''
 
The sum of the '''Lost Sales Cost''' and '''Warranty Cost''' is called '''Unreliability Cost'''.
 
 
'''Total Cost'''
 
For a given reliability, ''R'', the expected total cost is given by:
 
\begin{equation} \text{Total Cost}\left(R\right) = \text{Lost Sales Cost}\left(R\right) + \text{Warranty Cost}\left(R\right) + \text{Production Cost}\left(R\right)=\text{Unreliability Cost}\left(R\right)+\text{Production Cost}\left(R\right) \end{equation}
 
The production cost is a pre-shipping cost, whereas the warranty and lost sales costs are incurred after a product is shipped. These pre- and post-shipping costs can be seen in the figure below.
 
[[Image:Chart_totalcost.jpg|thumb|center|400px| ]]
 
The reliability value resulting in the lowest total cost will be the target reliability for the product.
 
===Profit and Return at Target Reliability===
 
With all of the costs described above, the profit at a given reliability value can be calculated as:
 
\begin{equation} \text{Profit}\left(R\right) = \text{Sales Revenue}\left(R\right) - \text{Warranty Cost}\left(R\right) - \text{Production Cost}\left(R\right) \end{equation}
 
 
'''Traditional ROI'''
 
First, consider that traditional ''Return On Investment'' (ROI) is a performance measure used to evaluate the efficiency of an investment, or to compare the efficiency of a number of different investments. In general to calculate ROI, the benefit (return) of an investment is divided by the cost of the investment; and the result is expressed as a percentage or a ratip. The following equation illustrates this.
<center>
<math>ROI=\frac{\text{Gain from Investment - Cost of Investment}}{\text{Cost of Investment}}</math></center>
 
In this formula, "gains from investment" refers to the revenue or proceeds obtained due to the investment of interest.
 
Return on investment is a very popular metric because of its versatility and simplicity. That is, if an investment does not have a positive ROI, or if there are other opportunities with a higher ROI, then the investment should not be undertaken.
 
"Reliability ROI" is computed in a similar manner by looking at the investment as the the investment in improving the reliability.
 
 
'''ReliaSoft's Reliability Return on Investment (R3OI)'''
 
R3OI considers the cost and return due to the product reliability. As we discussed before, high reliability will reduce the unreliability cost, but will increase the sales revenue and production cost. A balanced reliability target should be determined based on all of the costs involved. For a given initial investment value, the R3OI is calculated by:
<center>
<math>R3OI=\frac{\text{Profit(R)-Initial Investment }}{\text{Initial Investment}}</math>
</center>
 
===The Weibull++ Target Reliability Tool===
The purpose of this tool is to qualitatively explore different options with regards to a target reliability for a component, subsystem or system. All the costs are calculated using the equations given in the section above.
 
'''Inputs'''
 
There are five inputs. Specifically:
 
<br>
 
{| border="1" cellspacing="1" cellpadding="1" align="center"
|-
! scope="col" | Input Title
! scope="col" | Input Value
|-
| Expected failures/returns per year as&nbsp;%&nbsp;of Sales
| valign="middle" align="center" | <math>Q% \text{ where } 0\le Q\le 100 \,\!</math>
|-
| &nbsp;% of market share you expect to capture
| valign="middle" align="center" | <math>S% \text{ where } 0\le S\le 100 \,\!</math>
|-
| Average unit sales price
| valign="middle" align="center" | <math>P \text{ where } 0< P \,\!</math>
|-
| Average cost per unit to produce
| valign="middle" align="center" | <math>C \text{ where } 0< C < P+O \,\!</math>
|-
| Other costs per failure
| valign="middle" align="center" | <math>O \text{ where } 0< O < C+O \,\!</math>
|}
 
<br>
 
These five inputs are then repeated for three specific cases, Best Case, Most Likely and Worst Case.
 
<!-- NOTE: The \,\! is to keep the formula rendered as PNG instead of HTML. Please don't remove it.-->
 
<br>
 
{| border="1" cellspacing="1" cellpadding="1" align="center"
|-
! scope="col" | Input Title
! scope="col" | Best Case
! scope="col" | Most Likely
! scope="col" | Worst Case
|-
| valign="middle" align="left" | Expected failures/returns per year as&nbsp;%&nbsp;of Sales
| valign="middle" align="center" | <math>{{Q}_{1}}\,\!</math>
| valign="middle" align="center" | <math>{{Q}_{2}}\,\!</math>
| valign="middle" align="center" | <math>{{Q}_{3}}\,\!</math>
|-
| valign="middle" align="left" | &nbsp;% of market share you expect to capture
| valign="middle" align="center" | <math>{{S}_{1}}\,\!</math>
| valign="middle" align="center" | <math>{{S}_{2}}\,\!</math>
| valign="middle" align="center" | <math>{{S}_{3}}\,\!</math>
|-
| valign="middle" align="left" | Average unit sales price
| valign="middle" align="center" | <math>{{P}_{1}}\,\!</math>
| valign="middle" align="center" | <math>{{P}_{2}}\,\!</math>
| valign="middle" align="center" | <math>{{P}_{3}}\,\!</math>
|-
| valign="middle" align="left" | Average cost per unit to produce
| valign="middle" align="center" | <math>{{C}_{1}}\,\!</math>
| valign="middle" align="center" | <math>{{C}_{2}}\,\!</math>
| valign="middle" align="center" | <math>{{C}_{3}}\,\!</math>
|-
| valign="middle" align="left" | Other costs per failure
| valign="middle" align="center" | <math>{{O}_{1}}\,\!</math>
| valign="middle" align="center" | <math>{{O}_{2}}\,\!</math>
| valign="middle" align="center" | <math>{{O}_{3}}\,\!</math>
|}
 
&nbsp;
 
&nbsp; Based on the above inputs, four models are then fitted as functions of reliability, <math>R=(1-Q)\,\!</math>, or:
 
::&nbsp;<math>\begin{align}
  & f_{Market\_Share}(R)=1-{{e}^{-{{\left( \frac{R}{a} \right)}^{b}}}} \\
& f_{Sale\_Price}(R)=b\cdot {{e}^{\left( a\cdot R \right)}} \\
& f_{Production\_Cost}(R)=b\cdot {{e}^{\left( a\cdot \left( \frac{1}{1-R} \right) \right)}} \\
& f_{Failure\_Cost}(R)=b\cdot {{e}^{\left( a\cdot R \right)}} \\
\end{align}
</math>
 
&nbsp;
 
An additional variable needed then is maximum market potential, ''M''. It is defined by users in the following input box:
 
[[Image: Target Reliability Estimator Market Potential icon.png|thumb|center|400px]]
 
All the related costs are defined as given in the previous section and calculated as a function of reliability, ''R''. The value giving the lowest total cost is the optimal (target) reliability.
 
 
'''Example 1:'''
{{Example: Target Reliability-Determine Target Reliability Based on Costs}}

Latest revision as of 06:47, 13 August 2012

Redirect to:

Retrieved from "https://www.reliawiki.com/index.php?title=Template:Target_reliability_estimator&oldid=31437"