Template:Rotation: Difference between revisions

Latest revision as of 09:37, 31 July 2012

Redirect to:

@@ Line 1: / Line 1: @@
-== Rotation Example  ==
+#REDIRECT [[Example_Using_SCT_for_Standby_Rotation]]
-==== Description  ====
-Three devices A, B and C are in parallel and rotate to perform the task. A is ON initially, B and C are standby. When A fails, Turn B On; when B fails, turn C ON and when C fails, Turn A ON. The desired situation is that, at every moment, one and only one device is operating.  This means that, when a device is done with repair, it should be standby if there is already one device operating; or it should be operating when there is not device operating.
-==== BlockSim Solution ====
-The Blocksim modeling of this system is shown in Figure below.
-[[File:Blocksim Example Rotation example.png]]
-The failures of all three blocks follow Weibull distribution with Beta = 1.5 and Eta = 1000. The repair durations of three blocks follow Weibull distribution with Beta = 1.5 and Eta = 100. After repair, they are as good as new. Based on item's age, there are inspections for the three block every 500 hours, and the duration of inspection has the same distribution and parameters with repair duration. After inspection, the block is the same as it was when it failed.
-[[Category:BlockSim_Examples]]