BlockSim Analytical Fault Tree and RBD Plot Examples: Difference between revisions
Lisa Hacker (talk | contribs) No edit summary |
Lisa Hacker (talk | contribs) |
||
| Line 20: | Line 20: | ||
=====Failure Rate vs. Time===== | =====Failure Rate vs. Time===== | ||
[[Image:Failure Rate VS Time.png | [[Image:Failure Rate VS Time.png|center|700px|]] | ||
For the metrics, | For the metrics, three kinds of reliability importance plots are available: | ||
=====Reliability Importance vs. Time===== | =====Reliability Importance vs. Time===== | ||
Revision as of 05:06, 26 July 2012
 |
New format available! This reference is now available in a new format that offers faster page load, improved display for calculations and images and more targeted search.
As of January 2024, this Reliawiki page will not continue to be updated. Please update all links and bookmarks to the latest references at BlockSim examples and BlockSim reference examples.
Let's assume that the three components A, B and C follow failure distributions Weibull(Beta=1.5,Eta=1000), Weibull(Beta=1.1, Eta=800) and Exponential(MTTF=3000). The reliability for each components and the system at mission time =100 hours is shown in the figure below.
There are several plots available for analytic RBD and fault tree analysis. At the system level, there are four plots available as shown in the following:
Unreliability vs. Time
Reliability vs. Time
Probability Density Function
Failure Rate vs. Time
For the metrics, three kinds of reliability importance plots are available:
Reliability Importance vs. Time
Static Reliability Importance
Static Reliability Importance(Tableau)
.png)
In block level, there are four kind of plots available:
Block Unreliability vs. Time
Block Reliability vs. Time
Block Probability Density Function
