Template:Difference detection matrix: Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
(Redirected page to Reliability Test Design)
 
(5 intermediate revisions by 4 users not shown)
Line 1: Line 1:
==Test Design Using Life Difference Detection Matrix==
#REDIRECT [[Reliability Test Design]]
 
Engineers often need to design tests for detecting life differences between two or more product designs. The questions are how many samples and how long the test should be conducted in order to detect a certain amount of difference. There are no simple answers. Usually, advanced design of experiments (DOE) techiques should be utilized. For simple case, such as comparing two designs, the Difference Detection Matrix in Weibull++ can be used. The difference detection matrix graphically indicates the amount of test time required to detect a statistical difference in the lives of two populations.
 
 
As discussed in the test design using expected failure times plot, if the sample size is known, the expected failure time of each test unit can be obtained based on the assumed failure distribution. Now let's go one step further. With these failure times, we can then estimate the failure distribution and calculate any reliability metrics. This process is similar to the simulation used in [[Weibull SimuMatic|Simumatic]] where random failure times are generated from simulation and then used to estimate the failure distribution. This is also used by the difference detection matrix.
 
 
Assume we want to compare the B10 lives of two designs. The test is time terminated and the terimation time is set to ''T''. Using the method given in section [[Test Design Using Expected Failure Time Plots]], we can generate the failure times. For any failure time greater than ''T'', it is a suspension and the suspension time is ''T''. For each design, it B10 life and confidence bounds can be estimated from the generated failure/suspension times. If the two estimated confidence intervals overlap with each other, it means the difference of the two B10 lives cannot be detected from this test. We have to either increase the sample size or increase the test duration.
 
'''Example 7:'''
{{Example: Test Design Using Life Difference Detection Matrix}}

Latest revision as of 08:05, 29 June 2012

Redirect to:

Retrieved from "https://www.reliawiki.com/index.php?title=Template:Difference_detection_matrix&oldid=25826"