Template:Analysis of non-homogeneous warranty data: Difference between revisions

From ReliaWiki
Jump to navigation Jump to search
(Redirected page to Warranty Data Analysis)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
===Analysis of Non-Homogeneous Warranty Data===
#REDIRECT [[Warranty Data Analysis]]
In the previous sections and examples it is important to note that the underlying assumption was that the population was homogeneous. In other words, all sold and returned units were exactly the same, i.e. the same population with no design changes and/or modifications. In many situations, as the product matures, design changes are made to enhance and/or improve the reliability of the product.  Obviously, an improved product will exhibit different failure characteristics than its predecessor. To analyze such cases, where the population is non-homogeneous, one needs to extract each homogenous group, fit a life model to each group and then project the expected returns for each group based on the number of units at risk for each specific group.
 
'''Using IDs in Weibull++'''
 
Weibull++ uses the optional IDs column to differentiate between product versions or different designs (lots). Based on this entry, the data are then automatically separated and the parameters for each lot computed. Based on the computed parameters, failure projections can then be obtained. Note that it is important to realize that the same limitations as discussed previously, with regards to the number of failures that are needed, are also applicable here.  In other words, distributions can be automatically fitted to lots that have return (failure) data, whereas if no returns have been experienced yet (either because the units are going to be introduced in the future or because no failures happened yet), the user will be asked to specify the parameters, since they can not be computed. Consequently, subsequent estimation/predictions related to these lots would be based on the user specified parameters. Following is an example that illustrates the use of IDs.
 
 
'''Example 4:'''
{{Example: Warranty Analysis Non-Homogeneous Data Example}}

Latest revision as of 07:46, 29 June 2012

Redirect to:

Retrieved from "https://www.reliawiki.com/index.php?title=Template:Analysis_of_non-homogeneous_warranty_data&oldid=25804"