BlockSim Simulation RBD Plot ptPointAvailability: Difference between revisions

Revision as of 20:20, 23 January 2012

Reliability Web Notes

Diagram Simulation Point Availability

BlockSim

Reliability Web Notes
Diagram Simulation Point Availability
BlockSim
Template loop detected: Template:Bs system point availability
Analysis through Simulation

@@ Line 10: / Line 10: @@
 |-
 | align="center" valign="middle" |
-This is the probability that the system is up at time   . As an example, to obtain this value at   = 300, a special counter would need to be used during the simulation. This counter is increased by one every time the system is up at 300 hours. Thus, the point availability at 300 would be the times the system was up at 300 divided by the number of simulations. For this example, this is 0.930, or 930 times out of the 1000 simulations the system was up at 300 hours.
+{{bs system point availability}}
 |-
 | align="center" valign="middle" | [http://www.reliawiki.com/index.php/Repairable_Systems_Analysis_Through_Simulation Analysis through Simulation]