View source for Template:Time-to-failure data

===Time-to-Failure Data===
Time-to-failure (continuous) data is the most commonly observed type of reliability growth data. It involves recording the times-to-failure for the unit(s) under test. Time-to-failure data can be applied to a single unit or system or to multiple units or systems. There are multiple data entry schemes for this data type and each is presented next.
{{failure times data}}


{{grouped failure times}}

{{multiple systems (known operating times)}}

{{multiple systems (concurrent operating times)}}

{{multiple systems (concurrent operating times)-using dates}}

{{multiple systems with event codes}}

====Models for Time-to-Failure (Continuous) Data====
The following models can be used to analyze time-to-failure (continuous) data sets. Models and examples using the different data types are discussed in later chapters.

<br>
:1)	[[RGA Chapter 4|Duane]]
<br>
:2)	[[RGA Chapter 5|Crow-AMSAA (NHPP)]]
<br>
:3)	[[RGA Chapter 9|Crow Extended]]
<br>
:4)	[[RGA Chapter 10|Crow Extended - Continuous Evaluation]]
<br>