Mixed Data - Crow Extended Example

From ReliaWiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
RGA Examples Banner.png


New format available! This reference is now available in a new format that offers faster page load, improved display for calculations and images and more targeted search.

As of January 2024, this Reliawiki page will not continue to be updated. Please update all links and bookmarks to the latest references at RGA examples and RGA reference examples.




This example appears in the Reliability growth reference.


A one-shot system underwent reliability growth testing for a total of 20 trials. The test was performed as a combination of groups of units with the same configuration and individual trials. The following table shows the data set. The Failures in Interval column specifies the number of failures that occurred in each interval and the Cumulative Trials column specifies the cumulative number of trials at the end of that interval. In other words, the first three rows contain the data from the first trial, in which 8 units with the same configuration were tested and 3 failures (with different failure modes) were observed. The next row contains data from the second trial, in which 2 units with the same configuration were tested and no failures occurred. And so on.

Mixed Data
Failures in Interval Cumulative Trials Classification Mode
1 8 BD 1
1 8 BD 2
1 8 BD 3
0 10
0 11
0 12
1 13 BD 2
0 14
0 15
1 16 BD 4
0 17
0 18
0 19
1 20 BD 5


The table also gives the classifications of the failure modes. There are 5 BD modes. The average effectiveness factor for the BD modes is 0.7. Do the following:

  1. Calculate the demonstrated reliability at the end of the test.
  2. Calculate the growth potential reliability.

Solution

  1. Based on the equations presented in Crow-AMSAA (NHPP), the parameters of the Crow-AMSAA (NHPP) model are estimated as follows:
    [math]\displaystyle{ \widehat{\beta }=0.8572\,\! }[/math]
    and:
    [math]\displaystyle{ \widehat{\lambda }=0.4602\,\! }[/math]
    However, because there are only A or BD modes for mixed data, there is no growth during the test. In other words, the hypothesis for the [math]\displaystyle{ \hat{\beta }\,\! }[/math] parameter is that [math]\displaystyle{ \hat{\beta }=1.\,\! }[/math] From the Crow-AMSAA (NHPP) model, we know that:
    [math]\displaystyle{ \hat{\lambda }=\frac{n}{T_{n}^{\hat{\beta }}}\,\! }[/math]
    or, if [math]\displaystyle{ \hat{\beta }=1\,\! }[/math], this becomes:
    [math]\displaystyle{ \begin{align} \hat{\lambda }= & \frac{n}{{{T}_{n}}} \\ = & \frac{6}{20} \\ = & 0.3 \end{align}\,\! }[/math]
    As we have seen, the Crow-AMSAA instantaneous failure intensity, [math]\displaystyle{ {{\lambda }_{i}}(T)\,\! }[/math], is defined as:
    [math]\displaystyle{ \begin{align} {{\lambda }_{i}}(T)=\lambda \beta {{T}^{\beta -1}},\text{with }T\gt 0,\text{ }\lambda \gt 0\text{ and }\beta \gt 0 \end{align}\,\! }[/math]
    Using trials instead of time, and accommodating for [math]\displaystyle{ \hat{\beta }=1\,\! }[/math], we can calculate the instantaneous failure probability at the end of the test, or [math]\displaystyle{ T=20\,\! }[/math] :
    [math]\displaystyle{ {{Q}_{i}}(20)=\widehat{\lambda }=0.3\,\! }[/math]
    So the instantaneous reliability at the end of the test, or demonstrated reliability, is:
    [math]\displaystyle{ \begin{align} {{R}_{i}}(20)= & 1-{{Q}_{i}}(20) \\ = & 1-0.3 \\ = & 0.7 \end{align}\,\! }[/math]
    The next figure shows the data sheet as calculated in the RGA software.
    Rga9.12.png
  2. The growth potential unreliability is:
    [math]\displaystyle{ \begin{align} {{\widehat{Q}}_{GP}}(T)= & \left( \frac{{{N}_{A}}}{T}+\underset{i=1}{\overset{M}{\mathop \sum }}\,(1-{{d}_{i}})\frac{{{N}_{i}}}{T} \right) \\ = & \underset{i=1}{\overset{M}{\mathop \sum }}\,(1-0.7)\frac{{{N}_{i}}}{T} \\ = & 0.3*(\frac{1+1+1+1+1+1)}{20} \\ = & 0.09 \end{align}\,\! }[/math]
    So the growth potential reliability is:
    [math]\displaystyle{ \begin{align} {{\widehat{R}}_{GP}}(T) = & 1-{{\widehat{Q}}_{GP}}(T) \\ = & 1-0.09 \\ = & 0.91 \end{align}\,\! }[/math]
    The figures below show the calculation of the growth potential reliability for the mixed data using the RGA software's QCP, followed by the growth potential plot.
    Rga9.13.png


    Rga9.14.png