Lloyd-Lipow: Difference between revisions
No edit summary |
No edit summary |
||
Line 6: | Line 6: | ||
where: | where: | ||
:<math>R_k =\,\!</math> the actual reliability during the <math>k^{th}\,\!</math> stage of testing | :*<math>R_k =\,\!</math> the actual reliability during the <math>k^{th}\,\!</math> stage of testing | ||
:<math>R_{\infty} =\,\!</math> the ultimate reliability attained if <math>k\to{\infty}\,\!</math> | :*<math>R_{\infty} =\,\!</math> the ultimate reliability attained if <math>k\to{\infty}\,\!</math> | ||
:<math>\alpha>0 =\,\!</math> modifies the rate of growth | :*<math>\alpha>0 =\,\!</math> modifies the rate of growth | ||
Note that essentially, <math>{{R}_{k}}=\tfrac{{{S}_{k}}}{{{n}_{k}}}\,\!</math> . If the data set consists of reliability data, then <math>{{S}_{k}}\,\!</math> is assumed to be the observed reliability given and <math>{{n}_{k}}\,\!</math> is considered 1. | Note that essentially, <math>{{R}_{k}}=\tfrac{{{S}_{k}}}{{{n}_{k}}}\,\!</math> . If the data set consists of reliability data, then <math>{{S}_{k}}\,\!</math> is assumed to be the observed reliability given and <math>{{n}_{k}}\,\!</math> is considered 1. |
Revision as of 20:32, 11 September 2012
Lloyd and Lipow (1962) considered a situation in which a test program is conducted in [math]\displaystyle{ N\,\! }[/math] stages. Each stage consists of a certain number of trials of an item undergoing testing and the data set is recorded as successes or failures. All tests in a given stage of testing involve similar items. The results of each stage of testing are used to improve the item for further testing in the next stage. For the [math]\displaystyle{ {{k}^{th}}\,\! }[/math] group of data, taken in chronological order, there are [math]\displaystyle{ {{n}_{k}}\,\! }[/math] tests with [math]\displaystyle{ {{S}_{k}}\,\! }[/math] observed successes. The reliability growth function is then given in Lloyd and Lipow [6]:
- [math]\displaystyle{ {{R}_{k}}={{R}_{\infty }}-\frac{\alpha }{k} }[/math]
where:
- [math]\displaystyle{ R_k =\,\! }[/math] the actual reliability during the [math]\displaystyle{ k^{th}\,\! }[/math] stage of testing
- [math]\displaystyle{ R_{\infty} =\,\! }[/math] the ultimate reliability attained if [math]\displaystyle{ k\to{\infty}\,\! }[/math]
- [math]\displaystyle{ \alpha\gt 0 =\,\! }[/math] modifies the rate of growth
Note that essentially, [math]\displaystyle{ {{R}_{k}}=\tfrac{{{S}_{k}}}{{{n}_{k}}}\,\! }[/math] . If the data set consists of reliability data, then [math]\displaystyle{ {{S}_{k}}\,\! }[/math] is assumed to be the observed reliability given and [math]\displaystyle{ {{n}_{k}}\,\! }[/math] is considered 1.
Parameter Estimation
When analyzing reliability data in the RGA software, you have the option to enter the reliability values in percent or in decimal format. However, [math]\displaystyle{ {{\hat{R}}_{\infty }}\,\! }[/math] will always be returned in decimal format and not in percent. The estimated parameters in the RGA software are unitless.
Maximum Likelihood Estimators
For the [math]\displaystyle{ {{k}^{th}}\,\! }[/math] stage:
- [math]\displaystyle{ {{L}_{k}}=const.\text{ }R_{k}^{{{S}_{k}}}{{(1-{{R}_{k}})}^{{{n}_{k}}-{{S}_{k}}}} }[/math]
And assuming that the results are independent between stages:
- [math]\displaystyle{ L=\underset{k=1}{\overset{N}{\mathop \prod }}\,R_{k}^{{{S}_{k}}}{{(1-{{R}_{k}})}^{{{n}_{k}}-{{S}_{k}}}} }[/math]
Then taking the natural log gives:
- [math]\displaystyle{ \Lambda =\underset{k=1}{\overset{N}{\mathop \sum }}\,{{S}_{k}}\ln \left( {{R}_{\infty }}-\frac{\alpha }{k} \right)+\underset{k=1}{\overset{N}{\mathop \sum }}\,({{n}_{k}}-{{S}_{k}})\ln \left( 1-{{R}_{\infty }}+\frac{\alpha }{k} \right) }[/math]
Differentiating with respect to [math]\displaystyle{ {{R}_{\infty }}\,\! }[/math] and [math]\displaystyle{ \alpha ,\,\! }[/math] yields:
- [math]\displaystyle{ \frac{\partial \Lambda }{\partial {{R}_{\infty }}}=\underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{{{S}_{k}}}{{{R}_{\infty }}-\tfrac{\alpha }{k}}-\underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{{{n}_{k}}-{{S}_{k}}}{1-{{R}_{\infty }}+\tfrac{\alpha }{k}} }[/math]
- [math]\displaystyle{ \frac{\partial \Lambda }{\partial \alpha }=-\underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{\tfrac{{{S}_{k}}}{k}}{{{R}_{\infty }}-\tfrac{\alpha }{k}}+\underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{\tfrac{{{n}_{k}}-{{S}_{k}}}{k}}{1-{{R}_{\infty }}+\tfrac{\alpha }{k}} }[/math]
Rearranging Eqns. (R1) and (alpha1) and setting equal to zero gives:
- [math]\displaystyle{ \frac{\partial \Lambda }{\partial {{R}_{\infty }}}=\underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{\tfrac{{{S}_{k}}}{{{n}_{k}}}-\left( {{R}_{\infty }}-\tfrac{\alpha }{k} \right)}{\tfrac{1}{{{n}_{k}}}\left( {{R}_{\infty }}-\tfrac{\alpha }{k} \right)\left( 1-{{R}_{\infty }}+\tfrac{\alpha }{k} \right)}=0 }[/math]
- [math]\displaystyle{ \frac{\partial \Lambda }{\partial \alpha }=-\underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{\tfrac{1}{k}\tfrac{{{S}_{k}}}{{{n}_{k}}}-\left( {{R}_{\infty }}-\tfrac{\alpha }{k} \right)\tfrac{1}{k}}{\tfrac{1}{{{n}_{k}}}\left( {{R}_{\infty }}-\tfrac{\alpha }{k} \right)\left( 1-{{R}_{\infty }}+\tfrac{\alpha }{k} \right)}=0 }[/math]
Eqns. (R2) and (alpha2) can be solved simultaneously for [math]\displaystyle{ \widehat{\alpha }\,\! }[/math] and [math]\displaystyle{ {{\hat{R}}_{\infty }}\,\! }[/math] . It should be noted that a closed form solution does not exist for either of the parameters; thus they must be estimated numerically.
Least Squares Estimators
To obtain least squares estimators for [math]\displaystyle{ {{R}_{\infty }}\,\! }[/math] and [math]\displaystyle{ \alpha \,\! }[/math] , the sum of squares, [math]\displaystyle{ Q\,\! }[/math] , of the deviations of the observed success-ratio, [math]\displaystyle{ {{S}_{k}}/{{n}_{k}}\,\! }[/math] , is minimized from its expected value, [math]\displaystyle{ {{R}_{\infty }}-\tfrac{\alpha }{k}\,\! }[/math] , with respect to the parameters [math]\displaystyle{ {{R}_{\infty }}\,\! }[/math] and [math]\displaystyle{ \alpha .\,\! }[/math] Therefore, [math]\displaystyle{ Q\,\! }[/math] is expressed as:
- [math]\displaystyle{ Q=\underset{k=1}{\overset{N}{\mathop \sum }}\,{{\left( \frac{{{S}_{k}}}{{{n}_{k}}}-{{R}_{\infty }}+\frac{\alpha }{k} \right)}^{2}} }[/math]
Taking the derivatives with respect to [math]\displaystyle{ {{R}_{\infty }}\,\! }[/math] and [math]\displaystyle{ \alpha \,\! }[/math] and setting equal to zero yields:
- [math]\displaystyle{ \begin{align} \frac{\partial Q}{\partial {{R}_{\infty }}} = & -2\underset{k=1}{\overset{N}{\mathop \sum }}\,\left( \frac{{{S}_{k}}}{{{n}_{k}}}-{{R}_{\infty }}+\frac{\alpha }{k} \right)=0 \\ \frac{\partial Q}{\partial \alpha } = & 2\underset{k=1}{\overset{N}{\mathop \sum }}\,\left( \frac{{{S}_{k}}}{{{n}_{k}}}-{{R}_{\infty }}+\frac{\alpha }{k} \right)\frac{1}{k}=0 \end{align} }[/math]
Solving Eqns. (pqprll) and (pqpall) simultaneously, the least squares estimates of [math]\displaystyle{ {{R}_{\infty }}\,\! }[/math] and [math]\displaystyle{ \alpha \,\! }[/math] are:
- [math]\displaystyle{ {{\hat{R}}_{\infty }}=\frac{\underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{1}{{{k}^{2}}}\underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{{{S}_{k}}}{{{n}_{k}}}-\underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{1}{k}\underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{{{S}_{k}}}{k{{n}_{k}}}}{N\underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{1}{{{k}^{2}}}-{{\left( \underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{1}{k} \right)}^{2}}} }[/math]
- or:
- [math]\displaystyle{ \text{ }{{\hat{R}}_{\infty }}=\frac{\underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{1}{{{k}^{2}}}\underset{k=1}{\overset{N}{\mathop{\sum }}}\,{{R}_{k}}-\underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{1}{k}\underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{{{R}_{k}}}{k}}{N\underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{1}{{{k}^{2}}}-{{\left( \underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{1}{k} \right)}^{2}}} }[/math]
- and:
- [math]\displaystyle{ \hat{\alpha }=\frac{\underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{1}{k}\underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{{{S}_{k}}}{{{n}_{k}}}-N\underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{{{S}_{k}}}{k{{n}_{k}}}}{N\underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{1}{{{k}^{2}}}-{{\left( \underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{1}{k} \right)}^{2}}} }[/math]
- or:
- [math]\displaystyle{ \hat{\alpha }=\frac{\underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{1}{k}\underset{k=1}{\overset{N}{\mathop{\sum }}}\,{{R}_{k}}-N\underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{{{R}_{k}}}{k}}{N\underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{1}{{{k}^{2}}}-{{\left( \underset{k=1}{\overset{N}{\mathop{\sum }}}\,\tfrac{1}{k} \right)}^{2}}} }[/math]
Least Squares Example
After a 20-stage reliability development test program, 20 groups of success/failure data were obtained and are given in the table below. Do the following:
- 1) Fit the Lloyd-Lipow model to the data using least squares.
- 2) Plot the reliabilities predicted by the Lloyd-Lipow model along with the observed reliabilities and compare the results.
Test Stage Number([math]\displaystyle{ k\,\! }[/math]) | Number of Tests in Stage([math]\displaystyle{ n_k\,\! }[/math]) | Number of Successful Tests([math]\displaystyle{ S_k\,\! }[/math]) | Raw Data Reliability | Lloyd-Lipow Reliability |
---|---|---|---|---|
1 | 9 | 6 | 0.667 | 0.7002 |
2 | 9 | 5 | 0.556 | 0.7369 |
3 | 8 | 7 | 0.875 | 0.7552 |
4 | 10 | 6 | 0.600 | 0.7662 |
5 | 9 | 7 | 0.778 | 0.7736 |
6 | 10 | 8 | 0.800 | 0.7788 |
7 | 10 | 7 | 0.700 | 0.7827 |
8 | 10 | 6 | 0.600 | 0.7858 |
9 | 11 | 7 | 0.636 | 0.7882 |
10 | 11 | 9 | 0.818 | 0.7902 |
11 | 9 | 9 | 1.000 | 0.7919 |
12 | 12 | 10 | 0.833 | 0.7933 |
13 | 12 | 9 | 0.750 | 0.7945 |
14 | 11 | 8 | 0.727 | 0.7956 |
15 | 10 | 7 | 0.700 | 0.7965 |
16 | 10 | 8 | 0.800 | 0.7973 |
17 | 11 | 10 | 0.909 | 0.7980 |
18 | 10 | 9 | 0.900 | 0.7987 |
19 | 9 | 8 | 0.889 | 0.7992 |
20 | 8 | 7 | 0.875 | 0.7998 |
Solution
The least squares estimates are:
- [math]\displaystyle{ \begin{align} \underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{1}{k}= & \underset{k=1}{\overset{20}{\mathop \sum }}\,\frac{1}{k}=3.5977 \\ \underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{1}{{{k}^{2}}}= & \underset{k=1}{\overset{20}{\mathop \sum }}\,\frac{1}{{{k}^{2}}}=1.5962 \\ \underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{{{S}_{k}}}{{{n}_{k}}}= & \underset{k=1}{\overset{20}{\mathop \sum }}\,\frac{{{S}_{k}}}{{{n}_{k}}}=15.4131 \end{align} }[/math]
- and:
- [math]\displaystyle{ \underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{{{S}_{k}}}{k\cdot {{n}_{k}}}=\underset{k=1}{\overset{20}{\mathop \sum }}\,\frac{{{S}_{k}}}{k\cdot {{n}_{k}}}=2.5632 }[/math]
Substituting into Eqns. (ar) and (alph) yields:
- [math]\displaystyle{ \begin{align} {{{\hat{R}}}_{\infty }} = & \frac{(1.5962)(15.413)-(3.5977)(2.5637)}{(20)(1.5962)-{{(3.5977)}^{2}}} \\ = & 0.8104 \end{align} }[/math]
- and:
- [math]\displaystyle{ \begin{align} \hat{\alpha } = & \frac{(3.5977)(15.413)-(20)(2.5637)}{(20)(1.5962)-{{(3.5977)}^{2}}} \\ = & 0.2207 \end{align} }[/math]
Therefore, the Lloyd-Lipow reliability growth model is as follows, where [math]\displaystyle{ k\,\! }[/math] is the test stage.
- [math]\displaystyle{ {{R}_{k}}=0.8104-\frac{0.2201}{k} }[/math]
The reliabilities from the raw data and the reliabilities predicted from Eqn. (eq33) are given in the last two columns of Table 6.1. The figure below shows the plot. Based on the given data, the model cannot do much more than to basically fit a line through the middle of the points.
Confidence Bounds
In this section, the methods used in the RGA software to estimate the confidence bounds under the Lloyd-Lipow model will be presented. One of the properties of maximum likelihood estimators is that they are asymptotically normal. This indicates that they are normally distributed for large samples, as discussed in Lloyd and Lipw [6] and in Nelson [7]. Additionally, since the parameter [math]\displaystyle{ \alpha \,\! }[/math] must be positive, [math]\displaystyle{ \ln \alpha \,\! }[/math] is treated as being normally distributed as well. The parameter [math]\displaystyle{ {{R}_{\infty }}\,\! }[/math] represents the ultimate reliability that would be attained if [math]\displaystyle{ k\to \infty \,\! }[/math] . [math]\displaystyle{ {{R}_{k}}\,\! }[/math] is the actual reliability during the [math]\displaystyle{ {{k}^{th}}\,\! }[/math] stage of testing. Therefore, [math]\displaystyle{ {{R}_{\infty }}\,\! }[/math] and [math]\displaystyle{ {{R}_{k}}\,\! }[/math] will be between 0 and 1. Consequently, the endpoints of the confidence intervals of the parameters [math]\displaystyle{ {{R}_{\infty }} }[/math] and [math]\displaystyle{ {{R}_{k}}\,\! }[/math] also will be between 0 and 1. To obtain the confidence interval, it is common practice to use the logit transformation.
The confidence bounds on the parameters [math]\displaystyle{ \alpha \,\! }[/math] and [math]\displaystyle{ {{R}_{\infty }} }[/math] are given by:
- [math]\displaystyle{ C{{B}_{\alpha }}=\hat{\alpha }{{e}^{\pm {{z}_{\alpha /2}}\sqrt{Var(\hat{\alpha })}/\hat{\alpha }}} }[/math]
- [math]\displaystyle{ C{{B}_{{{R}_{\infty }}}}=\frac{{{{\hat{R}}}_{\infty }}}{{{{\hat{R}}}_{\infty }}+(1-{{{\hat{R}}}_{\infty }}){{e}^{\pm {{z}_{\alpha /2}}\sqrt{Var({{{\hat{R}}}_{\infty }})}/\left[ {{{\hat{R}}}_{\infty }}(1-{{{\hat{R}}}_{\infty }}) \right]}}} }[/math]
where [math]\displaystyle{ {{z}_{\alpha /2}}\,\! }[/math] represents the percentage points of the [math]\displaystyle{ N(0,1)\,\! }[/math] distribution such that [math]\displaystyle{ P\{z\ge {{z}_{\alpha /2}}\}=\alpha /2\,\! }[/math] .
The confidence bounds on reliability are given by:
- [math]\displaystyle{ CB=\frac{{{{\hat{R}}}_{k}}}{{{{\hat{R}}}_{k}}+(1-{{{\hat{R}}}_{k}}){{e}^{\pm {{z}_{\alpha /2}}\sqrt{Var({{{\hat{R}}}_{k}})}/\left[ {{{\hat{R}}}_{k}}(1-{{{\hat{R}}}_{k}}) \right]}}} }[/math]
- where:
- [math]\displaystyle{ Var({{\widehat{R}}_{k}})=Var({{\widehat{R}}_{\infty }})+\frac{1}{{{k}^{2}}}\cdot Var(\widehat{\alpha })-\frac{2}{k}\cdot Cov({{\widehat{R}}_{\infty }},\widehat{\alpha }) }[/math]
All the variances can be calculated using the Fisher Matrix:
- [math]\displaystyle{ {{\left[ \begin{matrix} -\tfrac{{{\partial }^{2}}\Lambda }{\partial R_{\infty }^{2}} & -\tfrac{{{\partial }^{2}}\Lambda }{\partial \alpha \partial {{R}_{\infty }}} \\ -\tfrac{{{\partial }^{2}}\Lambda }{\partial \alpha \partial {{R}_{\infty }}} & -\tfrac{{{\partial }^{2}}\Lambda }{\partial {{\alpha }^{2}}} \\ \end{matrix} \right]}^{-1}}=\left[ \begin{matrix} Var({{\widehat{R}}_{\infty }}) & Cov({{\widehat{R}}_{\infty }},\widehat{\alpha }) \\ Cov({{\widehat{R}}_{\infty }},\widehat{\alpha }) & Var(\widehat{\alpha }) \\ \end{matrix} \right] }[/math]
From Eqns. (R2) and (alpha2), taking the second partial derivatives yields:
- [math]\displaystyle{ \frac{{{\partial }^{2}}\Lambda }{\partial R_{\infty }^{2}}=-\underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{{{S}_{k}}}{{{\left( {{R}_{\infty }}-\tfrac{\alpha }{k} \right)}^{2}}}-\underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{{{n}_{k}}-{{S}_{k}}}{{{\left( 1-{{R}_{\infty }}+\tfrac{\alpha }{k} \right)}^{2}}} }[/math]
- [math]\displaystyle{ \frac{{{\partial }^{2}}\Lambda }{\partial {{\alpha }^{2}}}=-\underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{\tfrac{{{S}_{k}}}{{{k}^{2}}}}{{{\left( {{R}_{\infty }}-\tfrac{\alpha }{k} \right)}^{2}}}-\underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{\tfrac{{{n}_{k}}-{{S}_{k}}}{{{k}^{2}}}}{{{\left( 1-{{R}_{\infty }}+\tfrac{\alpha }{k} \right)}^{2}}} }[/math]
- and:
- [math]\displaystyle{ \frac{{{\partial }^{2}}\Lambda }{\partial {{R}_{\infty }}\partial \alpha }=\underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{\tfrac{{{S}_{k}}}{k}}{{{\left( {{R}_{\infty }}-\tfrac{\alpha }{k} \right)}^{2}}}-\underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{\tfrac{{{n}_{k}}-{{S}_{k}}}{k}}{{{\left( 1-{{R}_{\infty }}+\tfrac{\alpha }{k} \right)}^{2}}} }[/math]
Now the confidence bounds can be obtained after calculating Eqns. (cbll2) through (cbll5) and substituting into the Fisher Matrix.
As an example, you can calculate and plot the confidence bounds for the data set given above in the Least Squares Example. From Eqns. (cbll3), (cbll4) and (cbll5):
- [math]\displaystyle{ \begin{align} \frac{{{\partial }^{2}}\Lambda }{\partial R_{\infty }^{2}} = & -255.3835-937.2902=-1192.6737 \\ \frac{{{\partial }^{2}}\Lambda }{\partial {{\alpha }^{2}}} = & -24.4575-43.3930=-67.8505 \\ \frac{{{\partial }^{2}}\Lambda }{\partial {{R}_{\infty }}\partial \alpha } = & 48.6606-140.7518=-92.0912 \end{align} }[/math]
The variances can be calculated using the Fisher Matrix:
- [math]\displaystyle{ \begin{align} {{\left[ \begin{matrix} 1192.6737 & 92.0912 \\ 92.0912 & 67.8505 \\ \end{matrix} \right]}^{-1}}= & \left[ \begin{matrix} Var({{\widehat{R}}_{\infty }}) & Cov({{\widehat{R}}_{\infty }},\widehat{\alpha }) \\ Cov({{\widehat{R}}_{\infty }},\widehat{\alpha }) & Var(\widehat{\alpha }) \\ \end{matrix} \right] \\ = & \left[ \begin{matrix} 0.00093661 & -0.00127123 \\ -0.00127123 & 0.01646371 \\ \end{matrix} \right] \end{align} }[/math]
The variance of [math]\displaystyle{ {{R}_{k}}\,\! }[/math] is obtained from Eqn. (cbll2) such that:
- [math]\displaystyle{ Var({{\widehat{R}}_{k}})=0.00093661+\frac{1}{{{k}^{2}}}\cdot 0.01646371+\frac{2}{k}\cdot 0.00127123 }[/math]
Now Eqn. (llrc) can be calculated and the associated confidence bounds at the 90% confidence level are plotted in the figure below with the predicted reliability, [math]\displaystyle{ {{R}_{k}}\,\! }[/math] .
Lloyd-Lipow Confidence Bounds Example
Consider the success/failure data given in the following table. Solve for the Lloyd-Lipow parameters using least squares analysis and plot the Lloyd-Lipow reliability with 2-sided confidence bounds at the 90% confidence level.
Test Stage Number([math]\displaystyle{ k\,\! }[/math]) | Result | Number of Tests([math]\displaystyle{ n_k\,\! }[/math]> | Successful Tests([math]\displaystyle{ S_k=R_i\,\! }[/math]) |
---|---|---|---|
1 | F | 1 | 0 |
2 | F | 1 | 0 |
3 | F | 1 | 0 |
4 | S | 1 | 0.2500 |
5 | F | 1 | 0.2000 |
6 | F | 1 | 0.1667 |
7 | S | 1 | 0.2857 |
8 | S | 1 | 0.3750 |
9 | S | 1 | 0.4444 |
10 | S | 1 | 0.5000 |
11 | S | 1 | 0.5455 |
12 | S | 1 | 0.5833 |
13 | S | 1 | 0.6154 |
14 | S | 1 | 0.6429 |
15 | S | 1 | 0.6667 |
16 | S | 1 | 0.6875 |
17 | F | 1 | 0.6471 |
18 | S | 1 | 0.6667 |
19 | F | 1 | 0.6316 |
20 | S | 1 | 0.6500 |
21 | S | 1 | 0.6667 |
22 | S | 1 | 0.6818 |
Solution
Note that the data set contains three consecutive failures at the beginning of the test. These failures will be ignored throughout the analysis because it is considered that the test starts when the reliability is not equal to zero or one. The number of data points is now reduced to 19. Also note that the only time that the first three first failures are considered is to calculate the observed reliability in the test. For example, given this data set, the observed reliability at stage 4 is [math]\displaystyle{ 1/4=0.25\,\! }[/math] . This is considered to be the reliability at stage 1.
From the table, the least squares estimates can be calculated as follows:
- [math]\displaystyle{ \begin{align} \underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{1}{k}= & \underset{k=1}{\overset{19}{\mathop \sum }}\,\frac{1}{k}=3.54774 \\ \underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{1}{{{k}^{2}}}= & \underset{k=1}{\overset{19}{\mathop \sum }}\,\frac{1}{{{k}^{2}}}=1.5936 \\ \underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{{{S}_{k}}}{{{n}_{k}}}= & \underset{k=1}{\overset{19}{\mathop \sum }}\,\frac{{{S}_{k}}}{{{n}_{k}}}=9.907 \end{align} }[/math]
- and:
- [math]\displaystyle{ \underset{k=1}{\overset{N}{\mathop \sum }}\,\frac{{{S}_{k}}}{k\cdot {{n}_{k}}}=\underset{k=1}{\overset{19}{\mathop \sum }}\,\frac{{{S}_{k}}}{k\cdot {{n}_{k}}}=1.3002 }[/math]
Substituting into Eqns. (ar) and (alph) yields:
- [math]\displaystyle{ \begin{align} {{{\hat{R}}}_{\infty }} = & \frac{(1.5936)(9.907)-(3.5477)(1.3002)}{(19)(1.5936)-{{(3.5477)}^{2}}} \\ = & 0.6316 \end{align} }[/math]
- and:
- [math]\displaystyle{ \begin{align} \hat{\alpha } = & \frac{(3.5477)(9.907)-(19)(1.3002)}{(19)(1.5936)-{{(3.5477)}^{2}}} \\ = & 0.5902 \end{align} }[/math]
Therefore, the Lloyd-Lipow reliability growth model is as follows, where [math]\displaystyle{ k\,\! }[/math] is the number of the test stage.
- [math]\displaystyle{ {{R}_{k}}=0.6316-\frac{0.5902}{k} }[/math]
From Eqns. (cbll3), (cbll4), (cbll5) and the data given in Table 6.2:
- [math]\displaystyle{ \begin{align} \frac{{{\partial }^{2}}\Lambda }{\partial R_{\infty }^{2}} = & -176.847-40.500=-217.347 \\ \frac{{{\partial }^{2}}\Lambda }{\partial {{\alpha }^{2}}} = & -146.763-2.1274=-148.891 \\ \frac{{{\partial }^{2}}\Lambda }{\partial {{R}_{\infty }}\partial \alpha } = & 149.909-6.5660=143.343 \end{align} }[/math]
The variances can be calculated using the Fisher Matrix:
- [math]\displaystyle{ \begin{align} {{\left[ \begin{matrix} 217.347 & -143.343 \\ -143.343 & 148.891 \\ \end{matrix} \right]}^{-1}}= & \left[ \begin{matrix} Var({{\widehat{R}}_{\infty }}) & Cov({{\widehat{R}}_{\infty }},\widehat{\alpha }) \\ Cov({{\widehat{R}}_{\infty }},\widehat{\alpha }) & Var(\widehat{\alpha }) \\ \end{matrix} \right] \\ = & \left[ \begin{matrix} 0.0126033 & 0.0121335 \\ 0.0121335 & 0.0183977 \\ \end{matrix} \right] \end{align} }[/math]
The variance of [math]\displaystyle{ {{R}_{k}}\,\! }[/math] is obtained from Eqn. (cbll2):
- [math]\displaystyle{ Var({{\widehat{R}}_{k}})=0.0126031+\frac{1}{{{k}^{2}}}\cdot 0.0183977-\frac{2}{k}\cdot 0.0121335 }[/math]
Now Eqn. (llrc) can be calculated and the associated confidence bounds on reliability at the 90% confidence level are plotted in the figure below with the predicted reliability, [math]\displaystyle{ {{R}_{k}}\,\! }[/math] .
More Examples
Grouped per Configuration Example
A 15-stage reliability development test program was performed. The grouped per configuration data set is shown in the following table. Do the following:
- 1) Fit the Lloyd-Lipow model to the data using MLE.
- 2) What is the maximum reliability attained as the number of test stages approaches infinity?
- 3) What is the maximum achievable reliability with a 90% confidence level?
Stage, [math]\displaystyle{ k\,\! }[/math] | Number of Tests ([math]\displaystyle{ n_k\,\! }[/math]) | Number of Successes ([math]\displaystyle{ S_k\,\! }[/math]) |
---|---|---|
1 | 10 | 3 |
2 | 10 | 3 |
3 | 10 | 4 |
4 | 10 | 5 |
5 | 10 | 5 |
6 | 12 | 6 |
7 | 12 | 5 |
8 | 12 | 7 |
9 | 14 | 8 |
10 | 14 | 8 |
11 | 14 | 10 |
12 | 14 | 12 |
13 | 14 | 11 |
14 | 14 | 12 |
15 | 14 | 12 |
Solution
- 1) The figure below displays the entered data and the estimated Lloyd-Lipow parameters.
- 2) The maximum achievable reliability as the number of test stages approaches infinity is equal to the value of [math]\displaystyle{ R\,\! }[/math] . Therefore, [math]\displaystyle{ R=0.7157\,\! }[/math] .
- 3) The maximum achievable reliability with a 90% confidence level can be estimated by viewing the confidence bounds on the parameters in the QCP, as shown in the figure below. The lower bound on the value of [math]\displaystyle{ R\,\! }[/math] is equal to 0.6691 .
Reliability Data Example
Given the reliability data in the table below, do the following:
- Fit the Lloyd-Lipow model to the data using least squares analysis.
- Plot the Lloyd-Lipow reliability with 90% 2-sided confidence bounds.
- Determine how many months of testing are required to achieve a reliability goal of 90%.
- Determine what is the attainable reliability if the maximum duration of testing is 30 months.
Time(months) | Reliability(%) |
---|---|
1 | 33.35 |
2 | 42.50 |
3 | 58.02 |
4 | 68.50 |
5 | 74.20 |
6 | 80.00 |
7 | 82.30 |
8 | 89.50 |
9 | 91.00 |
10 | 92.10 |
Solution
- 1) The next figure displays the estimated parameters.
- 2) The figure below displays Reliability vs. Time plot with 90% 2-sided confidence bounds.
- 3) The next figure shows the number of months of testing required to achieve a reliability goal of 90%.
- 4) The figure below displays the reliability achieved after 30 months of testing.
Sequential Data Example
Use MLE to find the Lloyd-Lipow model that represents the data in the following table and plot it along with 95% 2-sided confidence bounds. Does the model follow the data?
Run Number | Result |
---|---|
1 | F |
2 | F |
3 | S |
4 | S |
5 | S |
6 | F |
7 | S |
8 | F |
9 | F |
10 | S |
11 | S |
12 | S |
13 | F |
14 | S |
15 | S |
16 | S |
17 | S |
18 | S |
19 | S |
20 | S |
Solution
The two figures below demonstrate the solution. As it can be seen from the Reliability vs. Time plot with 95% 2-sided confidence bounds plot, the model does not seem to follow the data. You may want to consider another model for this data set.
Sequential Data with Failure Modes Example
Use least squares to find the Lloyd-Lipow model that represents the data the following table. This data set includes information about the failure mode that was responsible for each failure, so that the probability of each failure mode reccurring is taken into account in the analysis.
Run Number | Result | Mode |
---|---|---|
1 | S | |
2 | F | 1 |
3 | F | 2 |
4 | F | 3 |
5 | S | |
6 | S | |
7 | S | |
8 | F | 3 |
9 | F | 2 |
10 | S | |
11 | F | 2 |
12 | S | |
13 | S | |
14 | S | |
15 | S |
Solution
The following figure shows the analysis.