View source for Two Level Factorial Design

{{Reference Example|{{Banner DOE Reference Examples}}}}
This example validates the calculation of the two level factorial design.

{{Reference_Example_Heading1}}
Data is from an example on page 223 in book “Design and Analysis of Experiments” by Douglas C. Montgomery, John Wiley & Sons, 2001.   

{{Reference_Example_Heading2}}
{| {{Table}}
!colspan="2" | Factor
!Treatment Combination
!colspan="3" | Replicate
|-
| '''A'''||'''B'''||||'''1'''||'''2'''||'''3'''
|-
| -||-||A low, B low||28||25||27
|-
| +||-||A high, B low||36||32||32
|-
| -||+||A low, B high||18||19||23
|-
| +||+||A high, B high ||31||30||29

|}
{{Reference_Example_Heading3}}
Table 6-1 from the book shows the ANOVA table for this experiment.

{| {{Table}}
!Source of Variation
!Sum of Squares
!Degrees of Freedom
!Mean Square
!F value
!P-Value
|-
| A||208.33||1||208.33||53.15||0.0001
|-
| B||75.00||1||75.00||19.13||0.0024
|-
| AB||8.33||1||8.33||2.13||0.1826
|-
| Error||31.34||8||3.92||||
|-
| Total||323.00||11||||||
|-
|}

{{Reference_Example_Heading4|DOE++}}
The results from software are same with the results from the book, which shows that A and B are significant factors.

{{image}}